559279
45
Zoom out
Zoom in
Previous page
1/56
Next page
45
5 Troubleshooting Error Messages
Error message: “The configured interrupt cannot be used”.
Possible error source: The AVM ISDN-Controller A1
and another hardware component (e.g. a sound card) are
set to the same IRQ value.
Solution: Check which interrupts (IRQs) are available in
your computer using the MSD.EXE program (Windows
directory). Then start the A1 Setup program from the
AVM program group and define another interrupt for the
Controller. Windows must be restarted for these changes
to take effect.
Error message: “Missing or wrong entry in SYSTEM.INI:
invalid I/O address”.
Possible error source: The I/O address entry in the
SYSTEM.INI file is incorrect or missing.
Solution: Start the A1 Setup program from the AVM
program group and enter a valid I/O address. Windows
must be restarted for these changes to take effect.
Error message: “Missing or wrong entry in SYSTEM.INI:
invalid interrupt number”.
Possible error source: The interrupt entry in the
SYSTEM.INI file is incorrect or missing.
Solution: Start the A1 Setup program from the AVM
program group and enter a valid interrupt. Windows must
be restarted for these changes to take effect.
Error message: “Error while initializing hardware”.
Possible error source: The AVM ISDN-Controller A1
driver files are damaged or the hardware is defective.
Solution: Perform the SETUP.EXE program from the
installation CD again. In order to load the Controller,
Windows must be restarted. If the error message
persists, contact AVM.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller A1 v3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller A1 v3.0 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller A1 v3.0

AVM ISDN-Controller A1 v3.0 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info