559279
43
Zoom out
Zoom in
Previous page
1/56
Next page
43
5 Troubleshooting Error Messages
5.2.3 Error Messages in Windows NT
Error message from Windows NT: “At least one service or
driver failed during system startup. Use Event Viewer to
examine the event log for details.”
Possible error source: The AVM ISDN-Controller A1
driver software cannot be loaded. This may be due to an
incorrect I/O address setting (jumper setting on the
Controller) or to an incorrect interrupt (IRQ).
Solution: For detailed information about the error, open
the Windows NT Event Viewer (Administrative Tools
folder). Check the messages from A1BASE and the
Service Control Manager.
The Administrative Tools folder also includes the
Windows NT Diagnostics program, with which you can
check the resources in your system. Find out which I/O
addresses and interrupts (IRQs) are available.
If the jumper position on the Controller must be changed
to another I/O address, exit Windows and turn off the
computer. Change the jumper position, restart Windows
NT, and then start the A1 Setup program from the AVM
group to enter the new I/O address and any change to the
interrupt (IRQ).
As a final step, Windows must be restarted to implement
these changes.
Error message: “Resource conflict detected...“
Possible error source: The ISDN-Controller cannot use
the configured I/O address or interrupt (IRQ), as it is
already assigned to another device.
Solution: Change the IRQ or the I/O address. Use the
Windows NT Diagnostics program from the Admini-
strative Tools folder to find out which I/O addresses and
interrupts are available. Turn off your computer, change
the jumper position and then restart Windows. Use the
A1 Setup program to make the corresponding changes
to the software. See sections 4.1 and 3.2.2 for more
information.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller A1 v3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller A1 v3.0 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller A1 v3.0

AVM ISDN-Controller A1 v3.0 User Manual - German - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info