299724

Auerswald dect 650 c Manual

92
Zoom out
Zoom in
Previous page
1/148
Next page
92 Setting Date & Time
Setting Date & Time
If you like to fully get benefit from the functions of your cordless phone, you should enter the current
date and time. The first time the phone turns on, the display asks you to enter the current date and
time, in this case just perform the steps 5 and 6.
To change the date and time any time in Standby mode:
☞
To enter the date, type the six digits which represent the day, month and year. e.g. for 15th June
2005 enter 150605. You can enter the year from 2000 to 2050. Enter the time in a 24-hour format.
e.g. for 10:15 PM enter 2215.
If you want to correct a digit in the middle while setting the date and time, use the navigation keys
to move the cursor to the wrong number, then enter a correct one.
If the electric supply is disconnected from the base (e.g. a black out or a disconnection of the AC
adaptor's cable) and the handset is switched off, the system time resets and need to be set again.
If date (only day and month) and time will be transferred as part of the CLIP information in a call to
your connection, this time information will automatically be taken over into the telephone. When
connecting this telephone to an Auerswald PBX the extended CLIP info (or CLIP info with date and
time) needs to be activated for the subscriber (in the configuration program). However, the year
needs to be set once as described here.
MENU
Press the MENU soft key to display the main
menu items.
SELECT
Press the navigation keys to choose 3.Setting,
and press the SELECT soft key.
SELECT
Press repeatedly the navigation keys to
choose 5.Date & Time, then press the SELECT
soft key. The display asks you to enter the
Base PIN (identification code).
N
SELECT
Enter the base PIN (preset at the factory to
0000) and press the SELECT soft key. The cur-
rent settings are displayed: the date on the
upper line in the Day/Month/Year format and the
time in the Hours:Minutes one in the lower line.
N
dd/mm/yyyy
03/08/2005
19:15
SELECT
Enter the current date and time using the
number keypad (6 digits for the date and 4
ones for the time as below explained in the
notes).
Press the SELECT soft key to save the setting.
3.Setting
5.Date & Time
BS Pin
****
… 92 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auerswald dect 650 c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auerswald dect 650 c in the language / languages: English, German as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info