496152
17
Zoom out
Zoom in
Previous page
1/24
Next page
8c: Operation - 3
Volume Control
Mute
Altering the Front Speakers Balance
The knob, keys on the handset
control the level of all connected loudspeakers. They do not
affect the TAPE or DIGITAL OUT sockets
VOLUME VOLand the
Turn the knob clockwise to increase the volume or
anticlockwise to decrease the volume in 1dB steps. When you
reach either end of the volume range, you will still be able to
rotate the knob but the volume will stop changing.
The volume is alterable from (very low) to
( loud). The Volume level appears in the display. If you go
below -90dB the 8000AP will mute and the word MUTE will
appear in the display.
The 8000AP remembers the volume when put into
Standby and returns to this volume when next switched on. If
the last used volume is above -20dB, the 8000AP will power
on at a level of -20dB. This eliminates surprises caused by a
high previous volume setting.
To mute all speaker outputs press the button on the
front panel or the mute key on the remote control. To restore
the volume press MUTE again.
If you have turned the volume down manually below
the -90dB mark, the MUTE display will not turn on or off when
you press the key.
The 8000AP mutes momentarily whenever you change inputs
or undertake certain functions.
Press the BALANCE key on the front panel or the remote
control to enter Balance Mode
Alter the balance to the Right or Left by rotating the Volume
knob or the Left/Right keys on the handset.
keys
.
Press the key on the front panel or the remote
control to exit Balance Mode
If you do nothing, after a short period the 8000AP will
automatically exit Balance Mode.
įĬ
ǡǠ
ǡǠ
.
VOLUME
-90dB +15dB
MUTE
Note:
MUTE
BALANCE
very
Note:
Keeping the
held down will move the sound progressively
further left or right
Night Mode
Forced Stereo Operation
Display On/Off
This mode works with Dolby Digital or DTS Digital Surround
sources which include Night Mode control parameters. Night
Mode reduces the dynamic range for quieter listening, so that
you can comfortably hear quieter passages at lower volume
levels -low levels are boosted, high levels are cut.
Press on the handset to toggle Night Mode
or
Pressing the key on the handset down-mixes a multi-
channel signal to a stereo (front left/right) signal only (the
stereo signal is created from all channels).
The subwoofer will appear in the Active Channels display if
the Front speakers have been set to Small or if the bass
management in the Setup menu has been set to L+R= to
Sub.
Pressing the key on the handset switches the display
off and on. When the 8000AP is operational and the display
is switched off only the Standby light remains on to show the
unit is active.
If you set the 8000AP to Standby when the display is switched
off, when you bring the unit out of Standby the display will
restore.
NIGHT MODE
On Off
STEREO
DISPLAY
Night Mode will remain active until it is switched off.
Always switch this mode off after use.
+
Page 15
VOLUME
MUTE
mute
3/3.1 ES Discrete
DVD VOL MUTE
+
Balance Control
L= 0.0dB R= 0.0dB
BAL
balance
A
B
Night Mode = On
Night Mode = Off
Stereo Mode
(Subwoofer Enabled)
Stereo Mode
(Subwoofer Disabled)
ENTERENTER
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiolab 8000AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiolab 8000AP in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info