496152
19
Zoom out
Zoom in
Previous page
1/24
Next page
Setting Speaker Levels
The Front Left loudspeaker determines the reference level. All
the other speaker levels are established as variations up or
down from this level. If for any reason you change the
reference level you will need to re-set all the loudspeakers.
The levels of all loudspeakers are set in order
If a speaker is set to it will not appear in the list
Set a comfortable level for the Left Front Speaker.
Press the key
Press the keys to adjust the level of each loudspeaker to
be the same as the Front Left loudspeaker. Individual speaker
levels can be adjusted by up to +/- 10dB.
Press the key to move to the next loudspeaker and repeat
the procedure to set all loudspeaker levels in sequence.
You will be prompted to set
the relative level of each speaker.
Press the key
Press the keys to
set the level to be the same as the Front Left loudspeaker
Follow the procedure
described on Page10
Front Left : Centre: Front Right: Surr. Right:
Subwoofer: Surr. Left: Back Left: Back Right
“None”
We suggest you follow the procedures described on
Page 12 when setting Loudspeaker Levels.
(ref)
When you have set one speaker:
If you have two Back speakers:
If you have only one (Centre Back)
speaker:
After setting up all the Loudspeaker levels:
if you are trimming the subwoofer.
If you are establishing the level and have not already set
up the subwoofer in the Setup Menu:
Ĭ
ǡǠ
Ĭ
Ĭ
ǡǠ
(Qset) Levels
Subwoofer = 0 dB
9b: The Qset Menu - 2
Lip-Sync Adjustment
On Screen Display Adjustment
Lip-sync adjustment will mainly be needed in the following
circumstances.
Some modern flat panel screens have heavy amounts of
video processing which adds delay, hence the need to delay
the audio so the picture and sound match.
Occasionally there are lip-sync problems, even with
‘correctly synchronized soundtracks. This may be because of
poor dubbing which cannot be compensated for as the delay
is erratic.
Press the key
Press the keys to
Press the key on the handset to exit the Qset screen.
The default TV system for the On Screen Display is PAL. If you
have an NTSC TV set (or have inadvertently set the OSD to
NTSC in a PAL area) the Menu Screen may not be visible.
Press on the handset to enter the QSet menu.
Press the key to move down through the menus until you
reach the final screen
Press the keys to toggle the TV system from PAL to NTSC
Press the key on the handset to exit the Qset screen.
1
2
QSET
QSET
QSET
Ĭ
ǡǠ
Ĭ
ǡǠ
adjust the delay from 0 - 500ms
NOTE: The selected lip-sync delay will remain even after
the 8000AP is switched off.
Finally, after setting all he system parameters:
If you have adjusted the lip-sync
because of programme irregularities you should reset it to the
correct value (or the default setting) immediately you have
finished listening to the affected programme.
Page 17
(Qset) Levels
Centre = 0 dB
(Qset) s
LeftBack =
Level
0dB
(Qset) Lip Sync
Delay = 0 ms
(Qset) OSD PAL/NTSC
Mode = PAL
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiolab 8000AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiolab 8000AP in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info