496152
20
Zoom out
Zoom in
Previous page
1/24
Next page
Sound is poor quality / distorted
The sound does not co-incide with the picture
The front panel display is blank
Sound comes from only some of your loudspeakers
Check that:
Check that:
Check that:
Check that:
all cables are making good connections. If necessary,
switch off the power, then withdraw the connector and plug it
back in again, then switch on the power.
you have set the speaker type to suit your system.
Night Mode is not enabled.
if you are using a flat screen TV the Lip-Sync is adjusted
correctly.
The display is not turned off. Press the display display key on
the remote control.
the 8000AP is set up to use all the speakers in your system.
a suitable surround sound source is selected and playing.
• if you are playing a digital source, the player is outputting
multi-channel data.
the display indicates that the disc is multi-channel .
you have not selected the ‘stereo’ down-mix mode.
the speaker balance is correct.
all amplifiers are switched on.
Until you are familiar with the operation of your 8000AP,
you may experience occasional difficulties. This guide
will help you overcome the most likely issues.
Check that:
Check that:
Check that:
Check that:
Check that:
No lights on the unit
No response/poor response to handset commands
No on-screen display
No sound
The Mute function does not work
the mains lead is plugged in and that the outlet to which it is
connected to is switched on.
the mains switch on the 8000AP is ON.
the 8000AP is switched on.
there are fresh batteries in the remote control.
the 8000AP’s display window is visible and you are pointing
the remote control towards it.
your television is on and switched to display the output from
the 8000AP.
the correct video input is selected at the TV.
the correct TV system is enabled
the correct source is selected.
the volume is turned up to a reasonable level
the output is not muted.
your source and power amplifier(s) are connected correctly
and switched on.
the volume has not been turned fully down to the mute
position.
(see Page 17)
10 Troubleshooting:
Page 18
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiolab 8000AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiolab 8000AP in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info