496152
16
Zoom out
Zoom in
Previous page
1/24
Next page
5.1
8b: Operation - 2
Digital Modes
Selecting an Analogue Input
The 8000AP will detect and display the format of the source
material received. Press the MODE key on the handset or
front panel to cycle through the options relevant to that
format. For example, when receiving Dolby Digital 3/2.1
(5.1) you have the option to apply “EX” processing to create a
back channel or “Stereo Downmix” if you just want to listen to
2 channels.
If, for any given input source, a mode option is changed the
8000AP will remember this change and use the last option
applied whenever the same encoded material is detected.
There are four Analogue inputs:
Additionally there is a input and a input.
may be selected by pressing the
appropriate input keys on the remote handset or by pressing
the button on the front panel until the desired
source is shown in the display window.
allows a tape monitor function (if you have a
three head recorder).This enables you to compare the quality
of a tape recording to the original at the time of recording.
The selected analogue input, the left and right channel of the
5.1 input or the left and right channel of a processed digital
signal are connected to the output when you
select the relevant input.
You may listen to the analogue tape input by pressing the tape
key on the remote control, or the tape button on the front
panel of the 8000AP.
routes the 5.1 analogue inputs on the rear
panel directly to the volume control on the 8000AP. When you
select this input you will hear a relay operate as the input is
selected and all processing functions are disabled.
When this input is selected you can only alter the volume and
balance. You can also trim the channel parameters via the
OSD menu.
VCR, SAT, TV, AUX.
TAPE 5.1 bypass
An analogue source
analogue
The TAPE input
TAPE OUT
The 5.1 input
Note: The titles of the analogue inputs are descriptors: all the
analogue inputs are identical as are the digital optical inputs
and the two HDMI inputs.
Analogue Screen Displays and Modes
Active Channels
The four regular analogue inputs and the Tape input all
operate in the same way.
Pressing the MODE button will invoke several matrixed post
processing modes. With the exception of PLII Movie
DTS Neo 6 Cinema, parameter adjustments for the other
modes can be accessed in the Setup menu. (
The options available will reflect only your chosen
loudspeaker configuration. For example, if you only have
Stereo loudspeakers or have enabled only the Front
loudspeakers the available options will default to Stereo only.
All processing modes are disabled when this input is selected
The Active channel lights tell you which outputs, at any given
moment, have audio present.
The basic operating mode is 2 Channel Stereo.
5.1 bypass input
Dolby
and
See Page11).
NOTE:
centre
subwoofer/LFE
front rightfront left
surround rightsurround left
back rightback left
AUX
TV
VCR
SAT
analogue
tape
TAPE
5.1 bypass
AUX VOL -30dB
ANALOG Stereo
AUX VOL -30dB
ANALOG PLII Movie
AUX VOL -30dB
ANALOG PLII Music
AUX VOL -30dB
ANALOG NEO:6 Cinema
AUX VOL -30dB
ANALOG NEO:6 Music
5.1 Bypass VOL -30dB
Page14
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiolab 8000AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiolab 8000AP in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info