810512
41
Zoom out
Zoom in
Previous page
1/48
Next page
41
6.3.1 SET MANUAL
It corresponds to the room heating temperature
set during the Manual program (it can be modied
also from Room Home turning the knob). Range
10.0÷25.0°C, by increments of 1°C (default 20.0°C).
6.3.3 SET COMFORT
It corresponds to the room heating temperature set
during the Comfort periods of Automatic program.
Range 10.0÷25.0°C, by increments of di 1°C (default
20.0°C).
6.3.4 SET ECONOMY
It corresponds to the room heating temperature
set during the Economy periods in the Automatic
program. Range 10.0÷25.0°C, by increments of di
1°C (default 16.0°C).
6.3.5 TIME SCHEDULING
It includes the time scheduling window through
which it is possible to dene a weekly time schedule
for Heating Mode (it can be enabled choosing the
Automatic program at Mode page). See what written
for Hot Water with the di󰀨erence that the Comfort
and Economy temperatures have to be followed.
6.3.6 NO-FROST FUNCTION
Entering the page, it is possible to enable/disable
this function and set up the working temperature.
The antifreeze temperature set is the temperature
used by the device to make a heating request to the
minimum delivery set. This request is maintained
until the room temperature exceeds the set itself.
Range 0.5÷10.0°C (default 5.0°C).
6.3.7 WATER FILLING
Entering this function, the pressure of the system is
displayed and, if it is low, it is possible to load the
system pressing the knob when the item Manual
lling is selected (if the UC can stand the function).
Since it is a delicate procedure, after pressing the
knob, one more conrmation is required.
6.3.8 PARAMETER SETTINGS
The Submenu o󰀨ers the access to restricted
settings, as a consequence, before their opening,
the page Conrmation Request is displayed. Once
conrmed the enter procedure, it is possible to
modify the following parameters:
ROOM SENSOR ENABLE
If it is set (YES), the delivery temperature is
xed considering both the room temperature
measured by the device inner probe and the
Room Set.
ROOM SENSOR MODULATION
If it is set (YES), the delivery temperature
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK OT80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK OT80 in the language / languages: English as an attachment in your email.

The manual is 1.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info