810512
43
Zoom out
Zoom in
Previous page
1/48
Next page
43
the curve values are the higher the maximum
delivery temperature will be.
As shown in picture 12, the set limits of
delivery temperature are 20°C min and 85°C
max. The curve number 9 is the steeper:
when external temperature is 0°C the delivery
maximum is 85°C.
OTC CURVE OFFSET
It is the vertical o󰀨set of the climatic curve,
through which the calculated delivery
temperature can be corrected. Range
-15÷15°C (default 0°C).
SYSTEM INERTIA
It is a parameter regulating the reaction speed
of the regulation algorithm, to be associated
to the inertia or to the dimension and type of
building and heating system. Range 1÷20,
where:
5 system with little heat inertia
10 system of normal size with
radiators (set by default)
20 system with high heat inertia
(underoor heating)
MIN SET HEATING
It is the minimum temperature allowed as
delivery temperature. This lower limitation,
which can be dened by user, is used both
in modulation and xed delivery and it is
automatically adapted at the rst link. It
depends on UC and it has a range 0÷99°C
(default 20°C).
MAX SET HEATING
It is the maximum temperature allowed as
delivery temperature. This upper limitation,
which can be dened by user, is used both
in modulation and xed delivery and it is
automatically adapted at the rst link. It
depends on UC and it has a range 0÷99°C
(default 90°C).
6.3.9 PARAMETER POWER GRAPHS
The Submenu gives access to the modication of
settings concerning the graphs seen in paragraph
INFORMATION relating to HEATING. The following
parameters can be modied here:
POWER EQUAL TO 100%
It is the power in kWe, equivalent to a
modulation level percentage of power at
100%. Range 0÷100 kWe (default 28 kWe).
POWER EQUAL TO 50%
It is the power in kWe, equivalent to a
modulation level percentage of power at 50%.
Range 0÷100 kWe (default 16 kWe).
POWER EQUAL TO 0%
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK OT80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK OT80 in the language / languages: English as an attachment in your email.

The manual is 1.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info