810512
42
Zoom out
Zoom in
Previous page
1/48
Next page
42
is modulated considering both the room
temperature measured by the device inner
probe and the Room Set. Otherwise, the
delivery temperature is kept xed to the
maximum allowed, in case modulated by
the external temperature, during all demand
periods (hysteresis management).
OUTDOOR SENSOR MODULATION
If it is set (YES), the maximum delivery
temperature (and the modulated one, if the
modulation with room probe is enabled)
is adjusted depending on the external
temperature value (with external probe
present), considering also the set values for
the climatic Curve and related O󰀨set.
ROOM HYSTERESIS
These are the extreme values used to regulate
the room temperature, during the regulation
without modulation (only during the hysteresis
regulation, modulation with disabled room
probe, but with room probe’s use enabled).
At set value + hysteresis the device switches
o󰀨 the request, at set – hysteresis it switches
on again.
Example: Room Set = 20.0°C and Hysteresis
value = 0.2°C, the device switches o󰀨 the
request when the room temperature reaches
20.2°C and switches on when it returns at
19.8°C. Range 0.1÷1.0°C (default set at
0.1°C).
OTC CURVE
It is the selected climatic curve used to
modulate the temperature limiting the Delivery
according to the external temperature. Range
1.0÷9.0°C (default 3.0°C).
Warning: The lower and upper limits of the
curves depend on the limits of UC and on the
minimum and maximum set. It is recommend
paying attention to the type of system when
these values are set.
Related to external temperature, the higher
picture 12
External Temperature °C
Maximum Delivery Temperature °C
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK OT80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK OT80 in the language / languages: English as an attachment in your email.

The manual is 1.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info