475724
23
Zoom out
Zoom in
Previous page
1/135
Next page
23
Turn the chain stretching screw anti-clockwise when the
saw chain is stretched too much.
Check that the chain links are positioned correctly in the
guiding groove of the guide bar.
Re-tighten the locking nuts (14).
Check the saw chain tension:
B before start of work
B after the first steps
B during sawing regularly all 10 minutes
Only with a correct clamped saw chain and a sufficient
lubrication you can influence the durability.
L Please observe the following:
B a new saw chain must be rest retched more frequently.
B in case of heating of chain to operating temperature it
expands and needs to be reclamped.
After finishing the sawing works release tension of saw
chain as in case of cooling too high tensions would emerge
in the saw chain.
B if chain flackers or comes out of the guide clamp it again
immediately.
P
P
r
r
e
e
p
p
a
a
r
r
i
i
n
n
g
g
f
f
o
o
r
r
c
c
o
o
m
m
m
m
i
i
s
s
s
s
i
i
o
o
n
n
i
i
n
n
g
g
L The chain saw is supplied without saw chain oil and
fuel filling.
Fill the saw chain as described under "Chain lubrication" and
"Fuelling".
Chain lubrication
L Never operate the chain saw without lubrication. Any
use without chain saw oil may result in damage of the
chain saw and guide bar.
The durability and cutting power of the chain depends on the
optimal lubrication. During operation the saw chain is
automatically wetted with oil.
Filling up saw chain oil
Stop the engine and wear protective gloves.
Avoid eye and skin contact.
Â
Put the chain saw on a suitable base and unscrew the oil
tank lock (11).
C Fill the oil tank with bio-degradable chain saw
adhering oil (order no. 400144). For easier filling use a
funnel.
When filling observe that no dirt reaches the oil tank.
Screw on the oil tank lock again.
Never use recycled oil or used oil. The guarantee expires
when using oil which is not allowed for chain saws.
Checking the chain lubrication
Never operate the chain saw without functioning chain
lubrication.
Check the function of the automatic chain lubrication by
switching on the chain saw and holding it with the pike in
direction of a carton or paper on the ground.
Do not get in contact with the ground with the chain. Keep a
safe distance of 20 cm.
If an increasing oil track is caused when checking it the oil
automatic works faultless. If there is no oil track despite full oil
tank:
Â
Clean the oil flow channel (19).
B If this is not successful please contact the customer
service.
Â
Adjust the chain lubrication:
See also the instructions under "Maintenance /
cleaning: Adjusting the chain lubrication".
F
F
u
u
e
e
l
l
l
l
i
i
n
n
g
g
Utmost care is required when handling fuel
and oil. Do not smoke. Keep away open flames
(risk of explosion).
This product is operated by a mixture from regular
petrol (unleaded) and two-stroke engine oil.
Petrol: Octane number at least 91 ROZ unleaded
+ Do not fill in leaded petrol, diesel or other non-approved
fuels.
+ Do not use petrol having a smaller octance number than 91
ROZ. This may lead to severe engine damages due to
increased engine temperatures.
+ If you frequently operate the product at high speeds, you
should use petrol with a higher octane number.
CThe use of unleaded petrol is recommended for envi-
ronment protection reasons.
Two-stroke engine oil:
acc. to JASO FC or ISO EGD specifications
+ Do only use two-stroke engine oil for air-cooled engines.
M
M
i
i
x
x
i
i
n
n
g
g
Ratio of mixture 40:1
Petrol Two-stroke engine oil
1 litre 0,025 litres
2 litres 0,050 litres
5 litres 0,125 litres
10 litres 0,250 litres
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BKS 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BKS 45 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info