336557
56
Zoom out
Zoom in
Previous page
1/70
Next page
GB 8
GB 9
Operation
The teppan yaki contains two thermostatically controlled
heating elements that can be set independently of each other.
The grill plate consists of two zones: a front zone and a rear one.
You set the temperatures for each zone with the two control
knobs. The maximum temperature you can set is 250 °C.
Safety lock
You unlock the safety feature by pressing the button in the rosette.
USE
Operation
5050
Safety lock
cancel
(appliance switched on)
Safety lock
switch on
(appliance switched off)
Switching on
Press the knob of the desired zone as far as it will go. Then turn
it clockwise to set the right temperature. The light ring turns
red to indicate that the zone is warming up. When the zone has
reached the temperature set, the ring turns green: the appliance
is ready for use.
Switching off
Always turn the knob anticlockwise to return to the zero setting.
You cannot reach the zero setting by turning the knob clockwise.
After the knob has sprung forward again, the safety lock is
activated.
Residual heat
Please remember that it takes some time for the teppan yaki to
cool down after switching off.
USE
50
100
150
200
250
zero position Switching on
50
100
150
200
250
Switching off
50
100
150
200
250
Switching on and off
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATAG ty 3011 m at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATAG ty 3011 m in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 4,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info