673148
22
Zoom out
Zoom in
Previous page
1/75
Next page
22
ENGLISH
8. REFRIGERANT CHARGE.
For the procedures described below, we recommend you contact a professional specialised in heatingand air
conditioning units.
Draining the Cooling Circuit:
It is imperative to drain the cooling circuit before charging the refrigerant.
- First draining procedure:
1.- High and low pressure switches.
2.- Low pressure circuit (blue).
3.- vacuum pipe/ gas charge (yellow).
4.- low pressure circuit (red).
5.- vacuum pump (yellow).
6.- high pressure valve (red).
7.- low pressure valve(blue).
A. Connect the gauge tubes to the intake pressure lines of the circuit (low pressure) and to the return pressure
lines (high pressure).
B. Connect the main line of the gauge to the vacuum pump.
C. Open all the valves, including the solenoid and the regulating valves.
D. Open the valves of the gauge (LO = low pressure valve / HI = high pressure valve).
E. Activate the vacuum pump and wait until the circuit is completely drained.
F. Close all valves or stopcocks and disconnect the vacuum pump.
Refrigerant Charge:
The equipment uses R-407-C class refrigerant, which is a blend of 3 different gases with different properties.
This is the reason why the gas taken from the refrigerant bottle must be introduced in the low-pressure circuit by means
of a charger (expansion system).
After having discharged the cooling circuit, and after having installed the charger and connected the flexible tubes of the
gauge to the high and low-pressure circuits, we can proceed with the charge:
1.- High and low pressure switches
2.- low pressure circuit (blue).
3.-vacuum pipe/ gas charge (yellow).
4.- low pressure circuit (red).
5.- R407 gas (yellow).
6.- high pressure valve (red).
7.- low pressure valve(blue).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Astralpool OPTIMA 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Astralpool OPTIMA 15 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info