736695

AS Motor AS 940 Sherpa 4 WD RC Manual

42
Zoom out
Zoom in
Previous page
1/60
Next page
Maintenance
42
Checking the automatic blade switchoff
1. Select the operating mode RC.
2. Switch on the transmitter and the receiver.
3. Start the engine.
4. Drive on large, open and level terrain.
5. Make sure that nobody is in the danger area of the device.
6. Engage the blade.
7. Do not actuate for 2minutes any control element on the
transmitter.
ð After these 2minutes, the blade must be automatically
switched off.
ð The status indicators on the device must go out.
Checking the parking brake
Warning
If the parking brake is not properly adjusted, the device
can roll away.
► Make sure that the parking brake always functions cor-
rectly.
1. Place the device on a surface with a good grip (e.g. con-
crete or asphalt).
2. Switch off the engine.
3. Let the device cool down for at least 20minutes.
4. Unlock the drive.
5. Activate the parking brake.
6. Try to push the device.
If the rear wheels lock up, the parking brake is set correctly. If
the device can be pushed, the parking brake must be read-
justed by an authorised service centre.
Check in the MC mode if the accelerator lever moves to neut-
ral position (parking brake) when the brake pedal is activated.
Check in the MC mode if the accelerator lever goes back to
neutral position (parking brake) when the driver leaves his
seat.
Check the foot brake
Check in the MC mode if the accelerator lever goes back to
neutral position (parking brake) when the brake pedal is actu-
ated.
Checking the blade
Warning
Wear or damage on the blades and the fastening elements
can result in the blades or the fastening elements coming
off.
► Check the blades and all fastening elements according
to the following instructions.
Warning
There is a considerable risk of injury due to improperly
mounted and maintained blades.
► Work at blades must be carried out by an authorised
service centre.
Use solid gloves when you check the blade.
Work on the blade requires specific expertise because an im-
balance inspection is necessary and torques must be ob-
served.
Blades that are sharpened improperly increase the workload
of the device and can result in vibration cracks or breaks.
Check the blade and all fastening elements for wear, damage
and cracks
– each time before and after you mow.
– in case of noticeable changes or unusual vibrations.
Contact an authorised service centre if you detect faults or
damage during inspection.
All shown blade parts and their fastening elements must be
changed
– if damage or cracks are detected.
– if unusually strong vibrations occur.
– at least once a year or every 50 operating hours, no matter
if wear does exist or not.
The material weakens, can suffer cracks, endangering
people and material assets. Ejected broken pieces can cause
severe injuries.
Unusual vibrations are an indication that
– blades are missing or broken,
– the blade is worn excessively or on one side or
– damage to the engine or cutter deck fastening.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info