736695
21
Zoom out
Zoom in
Previous page
1/60
Next page
Operating modes
21
Operating modes
The device can either be operated via remote control
(Remote Control = RC mode) or while riding on the device
(Manual Control = MC mode).
You can switch between operating modes at any time. How-
ever, it requires a great degree of knowledge to avoid faults
and risks. Please read the corresponding chapter carefully.
First, familiarize yourself with the device in the MC mode and
practise the procedures on a spacious, obstacle-free and flat
area.
Ride-on mode (MC):
We recommend working in the ride-on mode, for example,
to efficiently mow big, flat areas.
to precisely navigate around sensitive
obstacles.
to easily detect obstacles and foreign objects
and thus be safe from ejected parts.
to easily detect obstacles and foreign objects
and thus avoid damage of the device.
Remove control mode (RC)
We recommend working in the remote control mode, for
example,
when you want to protect yourself against
noise, physical strain, vibrations, exhaust
fumes, dust, sun, or rain.
at inaccessible places such as in the under-
growth, low branches or thorns.
on slopes.
to have a better overview of the danger area
and thus avoid accidents.
at the water’s edge or in the proximity of
edges with a risk of falling.
on soft, sensitive grounds.
to keep insects or pollen away.
Safety functions
To ensure safe operation at all times, the device is equipped
with safety functions. To make the engine and the blade run,
depending on the operating mode, certain requirements need
to be fulfilled. These requirements are described in the cor-
responding chapters.
Driving on steep terrain
Warning
Driving on the slope is dangerous. There is a tilting and
slipping hazard.
► Have skilled personnel who were trained by AS-Motor
show you the safe handling of the device before you
mow on steep terrain.
► Observe the safety instructions regarding mowing on
slopes and the danger area.
Move on slopes only when the differential lock is actuated.
Always check via the clinometer to see your device's sloping
angle.
Checking the slope
1. If the slope is unknown, check first in the RC mode.
2. On a level part, drive with disengaged blade parallel to the
slope.
3. Stop the device.
4. Read the cross slope on the clinometer at the rear of the
device.
5. If the slope is in the admissible range, move to a steeper
part and repeat the cross slope test.
6. In the MC mode, read the slope on the clinometer on the
tank.
Suitability on slopes in the MC mode:
Use the device in the ride-on mode (MC) only on less than
21° slopes.
Suitability on slopes in the RC mode:
Use the device in the remote control mode (RC) only on
less than 33° slopes.
When you are positioned sideways to the slope at an angle of
more than 33°, the horn of the device sounds at intervals.
Move on to flatter ground.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info