736695

AS Motor AS 940 Sherpa 4 WD RC Manual

20
Zoom out
Zoom in
Previous page
1/60
Next page
Acoustic signals
20
Carrying the transmitter
Fasten the belt to the transmitter in the desired way:
– Hip belt
– Carrying strap
Acoustic signals
Signals of the device
– Single honk signal after the transmitter is switched on: Ra-
dio connection between transmitter and receiver was suc-
cessfully established.
– Horn sounds at intervals: Receiver is in operation. No radio
contact to transmitter. Warning of battery consumption.
– Horn sounds at intervals in RC mode: The device sits in a
too inclined position.
Signals of the transmitter
– Horn sounds twice when the transmitter is switched on:
Transmitter is ready for operation.
– Horn sounds for a long time when the transmitter is
switched off: Transmitter is switched off.
Optical signals
Status indicators on the device
– Continuous light: Receiver is in operation. Receiver waits
for radio contact to transmitter to be established.
– Continuous light: An Emergency stop has occurred.
– Flashing: Beware, blade is engaged.
Lamps on the transmitter
– Control lamp oil pressure lights up: No oil pressure.
– Status indicator “blade engaged” is flashing: Beware, blade
is engaged.
Display on the transmitter
Frequency: After a radio contact has been estab-
lished between transmitter and receiver, the fre-
quency number is briefly displayed.
Transmitter in operation: Red dot jumps here
and there.
Warning battery capacity: Quick flashing of an
“L”. As soon as the display appears, the trans-
mitter can be operated for another approx. 30
minutes.
Error code: When the control detects an error,
the error code is displayed. For meaning of this
code, see chapter Error codes.
Energy saving mode: If you do not actuate a but-
ton over a longer period of time, the transmitter
switches off automatically.
LED display on the receiver
Fig.7:
Description LED 1 LED 2 LED 3
No supply Off Off Off
Supply is ok
and ready
Green light Flashing weak
green
Green light
Some type of
radio signal
was received
(not necessar-
ily by the cor-
responding
transmitter)
Green light Flashing
orange when
signal is
received
Green light
Connection to
the corres-
ponding trans-
mitter was
correctly es-
tablished
Green light Flashing
orange
Flashing
green
Disturbance in
HF channel
(while radio
connection is
established)
Green light Flashing
orange
Flashing red
Fault while
checking the
EMERGENCY
OFF relay
Green light Flashing
orange
Slowly
flashing red
Other error
sources
Off (undefined) Lights up or
flashing red
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AS Motor AS 940 Sherpa 4 WD RC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AS Motor AS 940 Sherpa 4 WD RC in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AS Motor AS 940 Sherpa 4 WD RC

AS Motor AS 940 Sherpa 4 WD RC User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info