578766

Arcam DiVA AVR100 Manual

9
Zoom out
Zoom in
Previous page
1/17
Next page
AVR100
9
English
Speaker settings page
The size and number of loudspeakers are defi ned on this page
of the OSD.
– A ‘LARGE’ speaker is one that is capable of handling a full
range signal (i.e. 20Hz–20kHz).
– A ‘SMALL’ speaker is one that is not capable of
reproducing a deep bass signal (i.e. below 100Hz), for
example a satellite speaker.
– ‘ON’ is used when a speaker is active and receives the
intended audio information.
– ‘OFF’ is used when a speaker is inactive. Audio signals
intended for speakers set to OFF are redirected to the
main speakers.
Presets for typical speaker setups
To make setting up easier, the Arcam AVR100 has three factory
presets, describing three typical home theatre speaker setups.
Choose the preset that closest describes the loudspeaker
package you have.
■ PRESET 1 – all large speakers and a subwoofer.
This preset is designed to play a full range signal through
each speaker. A subwoofer supports low frequency sound
reproduction
■ PRESET 2 – large front left and right speakers, small
centre and small rear speakers.
This preset is designed to redirect the low frequency
information for the surround and centre channels to the
main speakers. There is no subwoofer output with this
preset.
■ PRESET 3 – all small speakers and a subwoofer.
This preset is designed for systems with fi ve small
speakers combined with a subwoofer. The bass
frequencies from all channels are redirected to the
subwoofer.
Once you have chosen the preset that best describes your
loudspeaker package you can set the centre and surround
speakers to ‘OFF’ if you do not have these in your system.
No subwoofer loudspeaker?
Regardless of the size of your main speakers, if you do not
have a subwoofer connected to your AVR100 you should select
PRESET 2, to direct low frequency information to the main
speakers.
1 INPUT SETTINGS
2 CHANNEL BALANCE
3 CHANNEL DELAYS
4 SPEAKER SETTINGS
5 EXIT
SETUP
SPEAKER SETTINGS
PRESET : 1
MAIN : LARGE
CENTER : LARGE
SURROUND : LARGE
SUBWOOFER : ON
DO NOT SAVE AND EXIT
SAVE AND EXIT
SPEAKER SETTINGS
PRESET : 1
MAIN : LARGE
CENTER : LARGE
SURROUND : LARGE
SUBWOOFER : ON
DO NOT SAVE AND EXIT
SAVE AND EXIT
SPEAKER SETTINGS
PRESET : 2
MAIN : LARGE
CENTER : SMALL
SURROUND : SMALL
SUBWOOFER : OFF
DO NOT SAVE AND EXIT
SAVE AND EXIT
SPEAKER SETTINGS
PRESET : 3
MAIN : SMALL
CENTER : SMALL
SURROUND : SMALL
SUBWOOFER : ON
DO NOT SAVE AND EXIT
SAVE AND EXIT
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA AVR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA AVR100 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info