578766

Arcam DiVA AVR100 Manual

8
Zoom out
Zoom in
Previous page
1/17
Next page
AVR100
8
1 INPUT SETTINGS
2 CHANNEL BALANCE
3 CHANNEL DELAYS
4 SPEAKER SETTINGS
5 EXIT
SETUP
CENTER 0mS
REAR 0mS
DO NOT SAVE AND EXIT
SAVE AND EXIT
CHANNEL DELAYS
Distance to listening position e.g. Your measure
Front left or right 12ft or 4m ---------------------
Centre 9ft or 3m ---------------------
Rear left or right 6ft or 2m ---------------------
Difference e.g. Delay (ms)
CENTRE delay (12 – 9ft) or (4 – 3m)
= 3ft or 1m 3 milliseconds
REAR delay (12 – 6ft) or (4 – 2m)
= 6ft or 2m 6 milliseconds
CENTER 3ms
REAR 6ms
DO NOT SAVE AND EXIT
SAVE AND EXIT
CHANNEL DELAYS
CHANNEL DELAYS
CENTER N/A
REAR 21ms
DO NOT SAVE AND EXIT
SAVE AND EXIT
Channel delays page
For best results in a surround sound system, the sound from
all loudspeakers should reach the listener at the same time. To
help achieve this the AVR100 can add slight delays to certain
channels when in Dolby Digital or Dolby Pro Logic modes.
When playing a Dolby Digital source you can set a delay for
the centre channel of between 0 and 5ms and a delay for the
rear channels of between 0 and 15ms.
To calculate these delay times, fi rst measure (or estimate) the
distances from the listening position to the front, centre and
rear speakers. Keep a record of these distances by entering
them under the heading ‘Your measure’ in the table provided.
The centre channel delay is calculated by subtracting the centre
channel distance from the front left (or right) distance. The
difference represents the
CENTRE delay time.
The rear channels’ delay time is calculated by subtracting the
rear left (or right) distance from the front left (or right) distance.
The difference represents the
REAR delay time. Note that if your
rear loudspeakers are further from the listening position than
the front loudspeakers, you should set this delay to 0ms.
If you have made your measurements in feet, one foot
approximates to one millisecond (1ms) delay. If you have made
your measurements in metres, one metre approximates to three
milliseconds (3ms) delay.
When playing a Dolby Pro Logic source you can set a delay
for the rear channels between 15 and 30ms. There is no delay
setting for the centre channel.
The rear channel delay in Dolby Pro Logic is calculated by
adding 15ms to the rear channel delay calculated for Dolby
Digital. In our example, this is 15ms + 6ms = 21ms.
NOTE: It is not necessary to adjust delay times for a DTS
(Digital Theater Systems) source.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA AVR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA AVR100 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info