792117
8
Zoom out
Zoom in
Previous page
1/16
Next page
Press [F3] to add new satellite. Press [F4] to enter delete satellite dialog, and then press [OK] to confirm to delete
or press [MENU] to cancel.
Press [OK] to enter transponder list of current satellite.
User`s Manual
11 / 25
5.3
E
DIT
S
ATELLITE
The parameters of satellite, such as Orbit Position and
Transponder can be edit in this menu. All the satellites will
be listed in this menu.
Press [/] buttons to move curse in list.
Press [F2] button to edit the name or the orbit position of
current satellite in the dialog. And then press [/] to
move curse and [/] to change value of each focused
item in edit menu.
Press [F3] to add new satellite. Press [F4] to enter delete
satellite dialog, and then press [OK] to confirm to delete or
press [MENU] to cancel.
Press [OK] to enter transponder list of current satellite.
On transponder list menu, press [OK] or [F2] to edit
transponder. Press [F3] to add new transponder. Press [F4]
to enter delete dialog, press [OK] to confirm to delete or
press [MENU] to cancel. And press [OK] button to edit
selected transponder. And then press [/] to move
curse and [/] to change value of each focused item in edit menu.
5.4.
S
PECTRUM
C
HART
This menu will show the spectrum chart of setting
frequency range on current cable line. Press [/] to
switch curser focus between Start Frequency, End
Frequency, LNB Setting and Current Frequency Mark.
22K: Show the RF 22k status. The 22K
is on if the icon is green.
13V: Show the RF power output 13V status. The 13v output is on if the icon is
green.
18V: Show the RF power output 18V status. The 18v output is on if the icon is
green.
On transponder list menu, press [OK] or [F2] to edit transponder. Press [F3] to add new transponder. Press [F4] to
enter delete dialog, press [OK] to confirm to delete or press [MENU] to cancel. And press [OK] button to edit selected
transponder. And then press / to move curse and ▼/▲ to change value of each focused item in edit menu.
5.4. SPECTRUM CHART
This menu will show the spectrum chart of setting frequency range on current cable line. Press
▼/▲
to switch
curser focus between Start Frequency, End Frequency, LNB Setting and Current Frequency Mark.
User`s Manual
11 / 25
5.3
E
DIT
S
ATELLITE
The parameters of satellite, such as Orbit Position and
Transponder can be edit in this menu. All the satellites will
be listed in this menu.
Press [/] buttons to move curse in list.
Press [F2] button to edit the name or the orbit position of
current satellite in the dialog. And then press [/] to
move curse and [/] to change value of each focused
item in edit menu.
Press [F3] to add new satellite. Press [F4] to enter delete
satellite dialog, and then press [OK] to confirm to delete or
press [MENU] to cancel.
Press [OK] to enter transponder list of current satellite.
On transponder list menu, press [OK] or [F2] to edit
transponder. Press [F3] to add new transponder. Press [F4]
to enter delete dialog, press [OK] to confirm to delete or
press [MENU] to cancel. And press [OK] button to edit
selected transponder. And then press [/] to move
curse and [/] to change value of each focused item in edit menu.
5.4.
S
PECTRUM
C
HART
This menu will show the spectrum chart of setting
frequency range on current cable line. Press [/] to
switch curser focus between Start Frequency, End
Frequency, LNB Setting and Current Frequency Mark.
22K: Show the RF 22k status. The 22K
is on if the icon is green.
13V: Show the RF power output 13V status. The 13v output is on if the icon is
green.
18V: Show the RF power output 18V status. The 18v output is on if the icon is
green.
22K: Show the RF 22k status. The 22K is on if the icon is green.
13V: Show the RF power output 13V status. The 13v output is on if the icon is green.
18V: Show the RF power output 18V status. The 18v output is on if the icon is green.
40~50~60: The range of power level. Press [F3] to switch the display range between 40~60, 40~80
and 40~ 100.
03000 MHz/0 dBuV: The current frequency curse and power level, press
/
to set the current frequency.
03000: The start frequency of the spectrum chart.
04000: The end frequency of the spectrum chart.
User`s Manual
12 / 25
40~50~60: The range of power level. Press [F3] to switch the display range between
40~60, 40~80 and 40~ 100.
03000 MHz/0 dBuV : The current frequency curse and power level, press [/] to set
the current frequency.
03000: The start frequency of the spectrum chart.
04000: The end frequency of the spectrum chart.
Press [OK] to pop up LNB setting dialog box to set LNB
parameters if the curse is focusing on the LNB setting icon.
Press [/] to change current frequency if the curse is
focusing on the current frequency mark.
Press [/] to change start or end frequency of the
spectrum frequency range if the curse is focusing on the start or end frequency icon.
Press [OK] button to check whether the current frequency
can be locked or not. A dialog will show the locked
transponder once it locks.
5.5
A
NGLE
C
ALCULATION
The elevation and azimuth of the antenna will be
calculated according to the customized longitude and
latitude or the selected city. Press [OK] to enter edit
mode on My Longitude or My Latitude if Customized is
selected. And press [/] to switch the focused item
and press [/] to change values for each item under
edit mode.
010.1°E: The location of local area
50.2°N: The hemisphere of local area
31.8°: The elevation calculated by meter
168.2°: The azimuth calculated by meter
07.5°: The polarization of the LNB
Press [OK] to pop up LNB setting dialog box to set LNB parameters if the curse is focusing on the LNB setting icon
.
Press
/
to change current frequency if the curse is focusing on the current frequency mark.
Press
/
to change start or end frequency of the spectrum frequency range if the curse is focusing on the
start or end frequency icon.
Press [OK] button to check whether the current frequency can be locked or not. A dialog will show the locked
transponder once it locks.
User`s Manual
12 / 25
40~50~60: The range of power level. Press [F3] to switch the display range between
40~60, 40~80 and 40~ 100.
03000 MHz/0 dBuV : The current frequency curse and power level, press [/] to set
the current frequency.
03000: The start frequency of the spectrum chart.
04000: The end frequency of the spectrum chart.
Press [OK] to pop up LNB setting dialog box to set LNB
parameters if the curse is focusing on the LNB setting icon.
Press [/] to change current frequency if the curse is
focusing on the current frequency mark.
Press [/] to change start or end frequency of the
spectrum frequency range if the curse is focusing on the start or end frequency icon.
Press [OK] button to check whether the current frequency
can be locked or not. A dialog will show the locked
transponder once it locks.
5.5
A
NGLE
C
ALCULATION
The elevation and azimuth of the antenna will be
calculated according to the customized longitude and
latitude or the selected city. Press [OK] to enter edit
mode on My Longitude or My Latitude if Customized is
selected. And press [/] to switch the focused item
and press [/] to change values for each item under
edit mode.
010.1°E: The location of local area
50.2°N: The hemisphere of local area
31.8°: The elevation calculated by meter
168.2°: The azimuth calculated by meter
07.5°: The polarization of the LNB
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko TSC-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko TSC-1000 in the language / languages: English as an attachment in your email.

The manual is 2.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info