792117
6
Zoom out
Zoom in
Previous page
1/16
Next page
5.1.3 TP CONTROL
TP Control is short for transponder control. Press [F3] in Satellite Measure menu to enter this menu. It is very
easy and useful to check the output status of each port of Quattro LNB . Press [MENU] to exit to Finder menu.
Please see the figure on the right side:
5.1.4 AUTO DISEQC
Press F4 to enter into DiSEqC 1.0 detection menu as below.
5.2 LNB SETTING
All the LNB parameters are set in this menu. Such as LNB type, LNB power, 22k, Diseqc type and motor type.
Astra 19E: The current satellite. Press
/
to switch between satellites and press [OK] to enter satellite list
to select satellite. Press [OK] button to select the focused satellite and press [MENU] to exit from edit menu.
All the other parameters on the menu will be refreshed according to the selected satellite.
9750-10600: The LNB type. Press / to switch between LNB types and press [OK] to enter list to select type.
Auto: The 22k parameter. Press
/
button to switch between Auto, Off and On.
Auto: The power parameter of the LNB. Press
/
button to switch between Auto, Off, 13v and 18v.
DiSEqC 1.0: The DiSEqC port setting for DiSEqC 1.0 and 1.1. Press
/
button to switch between ports
or press [OK] button to select port in the list.
Fixed: Set the motor type. Press
/
to switch between Fixed, USALS and DiSEqC 1.2.
5.2.1 USALS Setting
Press [OK] to enter USALS SETUP menu on Position Type if the type sets to USALS parameters
019.2°E Astra 19E: The current satellite. Press [3/4] to switch between satellites and press [OK] to enter
satellite list to select satellite. Press [OK] button to select the focused satellite and press [MENU] to exit from
edit menu. All the other parameters on the menu will be refreshed according to the selected satellite.
6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko TSC-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko TSC-1000 in the language / languages: English as an attachment in your email.

The manual is 2.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info