792117
4
Zoom out
Zoom in
Previous page
1/16
Next page
3. HOW TO MEASURE
Power on the meter, select the system to measure or select system setting to set parameters for the device in
the HOME menu.
In all menus, press
▼/
button to navigate, press
/
button to change the value of focused item, press
[OK] button to confirm your select, edit value or enter a list to select a wanted item, press [MENU] button to
enter or exit menus.
How to measure satellite signal:
1. Connect the signal cable to F-Type, Female jack.
2. Enter Satellite submenu.
3. Calculate the elevation and azimuth according to your local position in Calculate Angels menu. Set or adjust
your dish to the right position.
4. Set the LNB parameters according to your field environment in LNB Setting menu. Make sure all the things
are correct.
5. Enter to Satellite Measure menu, select the correct satellite and a normal transponder to check the signal is
locked or not.
According to all the output values, such as strength, quality, CNR and power level, you can accurate your dish
to get the best quality signal. And also you can analyzer the signal in Spectrum Chart menu to help you to learn
the locked signal well. User can edit the satellite position and transponder in Satellite Edit menu.
How to measure terrestrial signal:
1. Connect the signal cable to IEC-Type, Female jack first.
2. Make sure set Antenna Power to ON in System Setting menu if your antenna needs power supply.
3. Analyze the signal in Terrestrial Measure menu.
4. Analyze the scope in Scope menu and the spectrum in Spectrum Chart menu.
How to measure digital cable signal:
1. Connect the signal cable to IEC-Type, Female jack first.
2. Analyze the signal in cable Measure menu.
3. Analyze the TILT in TILT menu and the spectrum in Spectrum Chart menu.
How to measure analogue TV signal:
1. Connect the signal cable to IEC-Type, Female jack first.
2. Analyze the signal in Measure menu.
3. Analyze the TILT in TILT menu and the spectrum in Spectrum Chart menu.
Please refer below descriptions if you want to learn all functions.
4. HOME MENU
The meter will enter this menu first during power on. Press ▼/▼ to switch items or [OK] to enter submenus.
DVB-S/S2: Submenu for DVB-S/S2 system.
DVB-T/T2/ISDBT: Submenu for DVB-T/T2/ISDBT system.
DVB-C/C2/MCNS: Submenu for DVB-C/C2/MCNS system.
Analogue TV: Submenu for analogue TV system.
System Setting: Submenu for system parameters setting. Such as language, auto power off and so on.
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Amiko TSC-1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Amiko TSC-1000 in the language / languages: English as an attachment in your email.

The manual is 2.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info