541346
16
Zoom out
Zoom in
Previous page
1/28
Next page
WZ16:2DX
AND
WZ12:2DX U
SER
G
UIDE
16
S
TEREO
I
NPUT CHANNEL
WZ12:2DX
ONLY
DUAL INPUTS A & B
- The stereo input channel features a dual input on RCA Phonos (A) and
TRS jacks (B). This is ideal for fast switching between stereo sources without having to repatch
the console or mixing two stereo sources together.
GAIN A -
Use this control to adjust the channel input sensitivity to match the connected source (-
20 to +10dBu) to the console operating level (0dBu) on the RCA Phono connectors. Press PFL to
check the signal reads an average of ‘0’ on the meters.
ON A -
Selects stereo source A (RCA PHONOS)
GAIN B -
Use this control to adjust the channel input sensitivity to match the connected source (-
20 to +10dBu) to the console operating level (0dBu) on the TRS Jack connectors. Press PFL to
check the signal reads an average of ‘0’ on the meters.
ON B
- Selects stereo source B (TRS JACKS). Press both A and B to mix both sources together.
MONO
- Combines the left and right outputs to mono the source. May also be used to input a
mono source to the stereo channel path.
EQUALISER
- Shelving HF and LF and two fixed frequency peak/dip mid controls provide 15dB of
boost or cut. The mid frequency controls provide optimum control over boomy or boxy sounds and
to add bite or reduce harshness of keyboards, vocals, etc. Use the mids to add warmth or
presence to the sound.
EQ IN
- Press to switch the EQ into the signal path.
AUXILIARY SENDS
- You can set up to 6 separately balanced mixes using the aux send controls.
Up to +6dB of boost is available.
Aux 1-4 and Aux 5-6
can be used as either MONITOR SENDS to the performers or as EFFECTS
SENDS to external signal processing equipment. The output can be listened to using the aux
master AFL system. MONITOR SENDS are normally set pre-fader (PRE) and EFFECTS SENDS
normally post-fader (POST). When set to POST, the amount of channel signal in the monitor mix
is dependent on the channel fader level. Pre-fade aux sends are post-EQ, post-ON as standard
(can be reconfigured pre-EQ or pre-ON by setting internal links).
The Left and Right stereo signals are summed to provide aux feeds in mono. However internal link
options allow for pre or post aux sends as stereo pairs i.e. AUX 1 = left, AUX 2 = right, etc. Refer
to the options section in this user guide.
BAL
- Balances the channel signal within the stereo image, L (odd groups) and R (even groups).
The centre position is detented for quick resetting.
ON
- This turns the channel signal on or off. A LED indicates status.
PEAK
- The red LED illuminates when the signal is within 5dB of clipping. Should this occur turn
back the GAIN control to reduce the signal level. This LED also half illuminates when a PFL
switch is pressed.
PFL
- Press PFL to listen to the pre-fade signal (mono) on headphones or local monitor without
affecting the main outputs. The signal level is shown on the L and R bargraph meters.
Channel fader
- 100mm smooth action fader controls the overall channel level. All post fade aux
send levels are dependent on the level of the channel fader.
3
DUAL
ST EREO
30
OO
20
10
10
+6OO
L
ODD
BAL
R
EVEN
ON
O
AUX
6
O
0
PRE
+6
POST
+6OO
AUX
5
0
PRE
POST
4
AUX
OO
0
0
+6
0
O
O
AUX
2
AUX
O
O
0
+6
+6
AUX
1
EQ
IN
0
0
LF
60Hz
-15
-15
+15
+15
0
MF1
MF2
-15 +15
-5
0
12kHz
HF
-15
MONO
+15
-10
15
ON
20
20
-10
0
GA I N
ON
5
10
0
GA I N
-5
5
10
15
PEAK
!
PFL
0
5
3-4
1-2
L-R
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath WZ16 mixwizard at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath WZ16 mixwizard in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Allen-Heath WZ16 mixwizard

Allen-Heath WZ16 mixwizard User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info