541346
14
Zoom out
Zoom in
Previous page
1/28
Next page
WZ16:2DX
AND
WZ12:2DX U
SER
G
UIDE
14
P
LUGGING UP THE
O
UTPUTS
LR Mix Inserts
Use these sockets if you wish to insert external signal processing equipment into the L-R mix post-
mix amp and pre-L-R fader. This lets you check the effect of the inserted equipment using the
console headphones or local monitor. For live sound it is common to insert graphic equalisers to
adjust for the room acoustics. In recording you could plug in a compressor to prevent unexpected
peaks overloading the recording. Use a suitable stereo jack lead or Y-adaptor for tip = send, ring =
return.
LR Main Outputs
These outputs are 3-wire balanced XLR operating at a nominal +4dBu to drive professional
equipment over long cable runs without interference pickup. You can, however, connect to 2-
wire unbalanced equipment inputs by linking signal - (cold) to ground (XLR pin3 to pin1).
Connect to an amplifier of suitable power rating for the venue to drive the PA loudspeakers.
Or connect to a 2-track recorder for studio or location recording.
Stage Monitor and Cue Sends
Set up a pre-fade aux mix to
send a monitor or cue mix to the
performers. The aux outputs
are 3-wire impedance balanced
for interference rejection when
plugged into balanced
equipment inputs. You could
insert a graphic EQ between the
output and the amplifier for
monitor feedback control
Effects Send and Return
Set up a post-fade aux mix to send
channel signals to an external effects
device such as reverb or delay.
Return the processed signal to the mix
by plugging the device output into ST1
or ST2 stereo return, or into a channel
input. These inputs can operate
balanced or unbalanced. For a mono
return simply plug into the L input
leaving R unplugged. The setting of
the channel aux send control
determines how much effect is added
to the signal.
2-Track Replay
Plug your 2-track recorder into a
stereo return to monitor your
recording, or for replay over the PA.
The return can also be used for
intermission replay from a CD player
or similar.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath WZ16 mixwizard at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath WZ16 mixwizard in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Allen-Heath WZ16 mixwizard

Allen-Heath WZ16 mixwizard User Manual - German - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info