541363

Allen-Heath ML 3000 Manual

16
Zoom out
Zoom in
Previous page
1/48
Next page
16 ML3000 User Guide
Rear Panel Connections
CHANNEL INPUT XLR input for mic or line level
signals. Pin 2 hot. Phantom power is fed to pins 2
and 3 through 6k8 series resistors when the front
panel +48V switch is pressed.
WARNING: Do not connect
unbalanced sources or cables to the XLR inputs
when phantom power is selected. To avoid loud
clicks always turn the channel off by pressing
the MUTE switch when switching +48V on or off
and when plugging or unplugging microphones.
INSERT TRS jack socket for combined insert send
and return. Tip = send, ring = return, sleeve =
ground. The insert is post-HPF and pre-EQ. Use
this to insert line level processors such as
compressors into the channel signal path. The
channel signal is interrupted when you plug into the
INSERT socket. With nothing plugged in the signal
is passed through switching contacts in the socket.
DIRECT OUT TRS jack providing the post-fade
channel signal as standard. You can reconfigure
the output as pre-fader or as post-fader with the
AUX 1 send control as a level trim by repositioning
internal jumper links. The output is 0dBu ground
compensated line level for connection to balanced
or unbalanced equipment.
ST1-4 IN. Each provides two balanced stereo
inputs on TRS jacks. These can be selected
independently or mixed together into the stereo
channel. They accept line level signals such as CD,
2-track players and effects processors.
MAIN OUTPUTS. Line level balanced XLR outputs
for the Auxes 1-8, Groups 1-4, Matrix 1-4, L, R and
C main mix. Pin 2 hot. These outputs can provide
up to +23dBu maximum and are suited to driving
line level equipment operating at nominal 0dBu or
+4dBu. The C output is available as the engineers
wedge monitor feed when the front panel mode
switch is selected.
Note: The GRP and AUX signals always remain
on their respective connectors regardless of the
setting of the front panel REVERSE switches.
OUTPUT INSERTS. Each of the L,R,C, Matrix 1-4
and 8 small fader paths has a pre master fader
insert point. These are TRS jack sockets for
combined insert send and return. Tip = send, ring =
return, sleeve = ground. Insert line level processors
such as compressors, limiters, delays and so on
into the output signal paths. The output signal is
interrupted when you plug into the INSERT socket.
With nothing plugged in the signal is passed
through switching contacts in the socket.
Note: Fader paths 1-4 may be Group or Aux
depending on the position of the front panel mode
switches. This lets you use inserts 1-4 for groups or
auxes according to your application.
DC POWER IN A heavy duty 10-pin connector
with locking ring connects to the console power
supply unit. A chassis ground terminal post is
provided for situations requiring earth strapping
between equipment.
WARNING: Use only the DC power
cable type as provided with the console. Refer
to the power supply user guide.
INSERT
- OUT
XLR
DIRECT OUT
INSERT
INPUT
SELECT
OUT
INSERT
INPUT
IN MIDI
INSERT
INPUT
DIRECT OUT DIRECT OUT
INSERT
INPUT
RS232
CHASSIS
INSERT
INPUT
DC POWER IN
INSERT
INPUT
XLR
+IN
- IN
1
2
33
1
INSERT
INPUT
RL
R
R
L
L
DIRECT OUTDIRECT OUT
DIRECT OUT DIRECT OUT
RL
MTX
INSERTLINE IN/OUT
Serial No.
+OUT
2
RETURN
SEND
TIP
RINGRING -
TIP +
TIPTIP
RINGRING
CONNECTIONS
INSERT
INSERT
INSERT
MTX MTX
INSERT
Made in the UK by
INSERTINSERT
MTX FADER FADERFADER
INSERT INSERT
FADER
OUT
RL
OUT
RL RL
IN
FADER
INSERT
FADERFADER
INSERT INSERT
FADER
INSERT
D
INPUTS
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info