541363
14
Zoom out
Zoom in
Previous page
1/48
Next page
14 ML3000 User Guide
Connecting the Power Supply
The ML3000 console range is supplied with the
RPS11 power supply unit. A second RPS11 may
be connected through the optional RPSD2
combiner unit as a redundant (backup) supply.
Before connecting please read the IMPORTANT
SAFETY INSTRUCTIONS printed at the front of this
user guide and the warnings printed on the rear of
the power supply. Also read the user guide
provided with the power supply. Heed all
instructions regarding the installation and ventilation
requirements of the unit.
Connecting Mains Power
Check that the correct mains lead with moulded
plug suitable for your territory has been supplied
with your console. The RPS11 accepts mains
voltages 100, 120, 220, 230V AC by setting the
position of the rear panel fuse carrier.
WARNING: Make sure the power
supply voltage is correctly set to match your
local mains voltage. Refer to the power supply
user guide.
Make sure that the IEC mains plug is pressed fully
into the MAINS INPUT socket.
Connecting the DC Cable
Plug the cable into the power supply DC OUT
socket. First align the locating lugs, press the plug
into the socket, and screw on the locking ring to
hold it firmly in place. Plug and secure the other
end into the console DC POWER IN socket.
If you are using a second ‘redundant’ supply as a
backup then connect as described in the RPSD2
user guide.
Turning the Console On or Off
First check that the mains and DC leads are
correctly plugged in and secured. Turn on the
power supply using its front panel mains switch.
The console must be connected to the power
supply before turning it on.
To avoid loud pops in the speakers make sure that
the connected power amplifiers are turned off
before switching the console on or off.
WARNING: To avoid damage to the
speakers always switch the power amplifiers on
last and off first.
The console meters pulse briefly on power up. This
is normal.
INSERT
DIRECT OUT
INPUT
INSERT
INPUT
DIRECT OUT
INSERT
INPUT
DIRECT OUT
INPUT
INSERT
DIRECT OUT
INSERT
INPUT
DIRECT OUT
DC CABLE
MAINS CABLE
SELECT
OUT IN MIDI
RS232
CHASSIS
DC POWER IN
Pins 2,6,7,8,9 =
T 3.15A 20mm 220 - 240V~
T 5.0A 20mm 100 - 120V~
FUSE TYPE AC SUPPLY
RPS11
Made in the UK by
not connected
SERIAL No:
CONSOLE POWER SUPPLY
320VA MAX
300W MAX
47-63Hz
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE
CAUTION: F OR CONTINUED PRO TECTION AGAINST RISK OF FIRE REPLACE FUSE
ATTENTION: REMPLACER LE FUSIBLE AVEC UN DES MEMES CARACTERISTIQUES.
AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
10 = +48V 0.2A
4 = CHASSIS 0V
PIN CONNECTIONS
1 = +16V 5A
5 = AUDIO 0V
3 = - 16V 5A
DC OUT
WITH SAME TYPE AND RATING.
AC MAINS IN ~
NO USER SERVICEABLE PARTS INSIDE
WARNING: THIS APP ARATUS MUST BE EARTHED.
CAUTION
DIRECT OUT
INSERT
INPUT
INSERT
INPUT
INSERT
INPUT
INSERT
INPUT
DIRECT OUT DIRECT OUT DIRECT OUT
INSERT
INPUT
INSERT
INPUT
INSERT
INPUT
INSERT
INPUT
RL
R
R
L
L
DIRECT OUTDIRECT OUT DIRECT OUT
DIRECT OUT
RL
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info