541363
12
Zoom out
Zoom in
Previous page
1/48
Next page
12 ML3000 User Guide
Technical Specifications
0dBu = 0.775 Vrms, +4dBu = 1.23 Vrms
Operating Levels
Channels......................................... 0dBu Headroom +21dB
Mix .................................................. -2dBu Headroom +23dB
Max XLR output .............................. +23dBu
Frequency Response Referred to 1kHz at +4dBu
Mic to main output (+40dB)............. 20Hz to 70kHz +0/-0.5dB
Line to main output (0dB)................ 20Hz to 22kHz +0/-0.5dB
Distortion @1kHz 0dBu
THD+noise...................................... < 0.01%
CMRR Common mode rejection @1kHz
Mic (+40dB)..................................... > 85dB
Mic + Pad (0dB) .............................. > 50dB
Crosstalk Referred to driven channel @1kHz
Channel to channel......................... < -95dB
Mute shutoff .................................... < -85dB
Fader shutoff................................... < -85dB
Noise Performance Measured rms 22Hz to 22kHz unweighted
Mic EIN with 150 ohm source ......... -128dB
Residual output noise ..................... < -98dBu
Mix noise, nothing routed................ < -95dBu
Mix noise, 24 channels routed ........ < -88dBu
Metering
Reading 0................. 0dBu at XLR outputs
LED meters.............. Peak reading, 3 colours
VU meters................ Ave reading, Illuminated moving coil
Peak indicators ........ 5dB before clip, multi-point sensing
Input meters............. 4 bar LED (signal, 0, +6, peak)
Group/Mtx meters .... VU
L,R,C meters............ VU and 16 bar LED
Lamp Connectors x3
Connector ....................................... XLR-F 4pin
Rating.............................................. 12V 400mA max
Channel Filters
Slope............................................... 12dB/oct high pass
Frequency .......................................Off to 400Hz
Mono Equaliser
HF.................+/-15dB, 12kHz shelf
HM................+/-15dB, 500Hz to 15kHz bell Q=1.9
LM ................+/-15dB, 35Hz to 1kHz bell Q=1.9
LF .................+/-15dB, 60Hz shelf
Stereo Equaliser
HF.................+/-15dB, 12kHz shelf
HM................+/-15dB, 2.5kHz bell Q=1.6
LM ................+/-15dB, 250Hz bell Q=1.6
LF .................+/-15dB, 60Hz shelf
Power Supply Model RPS11
Case...........................External 3U rack or floor mount
Type ...........................Linear, convection cooled
Mains Voltage ............ 100,120,220,230 V.AC selectable
Mains Frequency........ 50/60Hz
Power consumption.... 300W
Dimensions Width.............. Depth...... .....Height
24 Channel 1141 (45”) ...... 640 (25.2”)....252 (9.9”)
32 Channel 1396 (55”) ...... 640.......... .....252
40 Channel 1651 (65”) ...... 640.......... .....252
48 Channel 1906 (75”) ...... 640.......... .....252
RPS11 psu 483 (19”) ........ 229 (9”)... .....134 (3U)
RPSD2 483 (19”) ........ 180 (7”)... .....45 (1U)
Weights 24 Channel..... 34 kg (75 lbs)
32 Channel..... 41 kg (90 lbs)
40 Channel..... 48 kg (106 lbs)
48 Channel..... 55 kg (121 lbs)
RPS11 psu..... 9.5 kg (21 lbs)
RPSD2........... 6kg (13 lbs)
INPUTS:
Mic (Pad out)................ XLR.................balanced, pin2+........ 2k ohm..............variable -60 to -10dBu........ Max +11dBu
Mic/Line (Pad in).......... ........................ ................................. >10k ohm..........variable -40 to +10dBu ....... Max +31dBu
Stereo ST1-12.............. TRS jack.........balanced, tip+........... >20k ohm..........variable -18 to +6dBu......... Max +27dBu
2-Track......................... TRS jack.........balanced, tip+ .......... >20k ohm..........+4dBu................................. Max +25dBu
Matrix Ext In................. TRS jack.........balanced, tip+........... >20k ohm..........0dBu...................................Max +21dBu
INSERTS:
Input............................. TRS jack.........unbalanced, tip send, ring return.........0dBu................................... Max +21dBu
Output .......................... TRS jack.........unbalanced, tip send, ring return.........-2dBu.................................. Max +21dBu
Matrix ........................... TRS jack.........unbalanced, tip send, ring return.........-2dBu.................................. Max +21dBu
OUTPUTS:
L,R,C............................ XLR.................balanced, pin2+........ <75 ohm............0dBu................................... Max +23dBu
Grp 1-4......................... XLR.................balanced, pin2+........ <75 ohm............0dBu................................... Max +23dBu
Aux 1-8......................... XLR.................balanced, pin2+........ <75 ohm............0dBu................................... Max +23dBu
Matrix 1-4..................... XLR.................balanced, pin2+........ <75 ohm............0dBu................................... Max +23dBu
Direct out...................... TRS jack.........ground comp, tip+ .... <50 ohm............0dBu................................... Max +21dBu
2-Track......................... TRS jack.........ground comp, tip+ ....<50 ohm............0dBu................................... Max +21dBu
TB/Osc out................... TRS jack.........imp balanced, tip+.... <50 ohm............0dBu................................... Max +21dBu
Local Monitor ............... TRS jack.........imp balanced, tip+.... <50 ohm............0dBu................................... Max +21dBu
Headphones................. TRS jack.........tip left, ring right........ for stereo headphones >30 ohms
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath ML 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath ML 3000 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info