541368
18
Zoom out
Zoom in
Previous page
1/44
Next page
Allen & Heath 18 GS_R24 User Guide
STEREO INPUT CHANNEL
EQ IN
I/P=DAW
SEND=
L-R
1-2
3-4
BUS
M
DAW
1
+6
AUX
2
+6
AUX
3
+6
AUX
4
+6
AUX
5
+6
AUX
6
+6
AUX
Pre
LR
BAL
POST EQ
Auxiliary sends 1 & 2
Each of these controls sends a signal to an Aux bus. The signal is sourced pre-
fade which means that the level is independent of, and unaffected by the fader.
Auxes 1 & 2 are mono buses so the stereo pre-fade signals are summed to-
gether to provide the source for the send.
These sends are not affected by the Mute switch by default, so muting the
channel does not mute the Aux sends but they can be selected to be post-
mute where they will follow the mute status (internal jumper links).
The control varies the signal level to the bus from off (fully attenuated) to
+6dB, with unity gain at the arrow.
There are master level controls for all of the Auxiliary outputs situated in the
master section of the mixer.
Auxes 5 & 6
The source for Aux sends 5 & 6 is post-fader by default. They are muted by
the Mute status. Auxes 5 & 6 are primarily used for effects sends. However,
an internal jumper option can be altered to select them to be sourced pre-
fader, for example if more monitor sends are required.
Auxes 3 & 4
The source for Aux sends 3 & 4 is normally post-fader but can be selected
pre-fader by pressing the Pre switch.
Balance
The balance control adjusts how the stereo left and right channels are bal-
anced when routed to the stereo L-R mix bus or the pairs of group buses.
Unity gain is in the middle, the opposite signal is attenuated when set left or
right.
Bus Routing Switches
The L-R switch connects the post-fade left & right signals to the main
L-R mix bus via the balance control. For minimum noise from the mix
bus summing amplifier, leave the switches in their up positions if the
channel signal is not required on the bus.
The M switch routes the post-fade mono sum of left & right to a mono
mix bus which is independent of the balance control.
The 1-2 and 3-4 switches are for routing the post-balance signal to
pairs of audio sub-groups which have independent insert points, mas-
ter faders, outputs and sub routing to the main mix buses if required.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GS-R24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GS-R24 in the language / languages: English as an attachment in your email.

The manual is 8,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info