541368
16
Zoom out
Zoom in
Previous page
1/44
Next page
Allen & Heath 16 GS_R24 User Guide
STEREO INPUT CHANNEL
REAR PANEL CONNECTIONS
FRONT PANEL CONTROLS
ST1 (& ST3) Phono sockets
Standard RCA phono sockets for unbalanced stereo inputs.
Nominal level = 0dBu
ST1 Level
The input level control varies the level of the signal from off (fully attenuated)
to +10dB of gain at the maximum position.
ST2 (& ST4) Jack sockets
Standard 1/4” (6.25mm) Jack socket for balanced or unbalanced line level
signals. Wired Tip=Hot(+), Ring=cold (-), Sleeve=Chassis.
The left channel input is connected to the break contacts of the right channel
input socket so a mono source can feed both left & right channels if required.
Nominal level = 0dBu
10
-30
-20
-5
0
5
-10
ST1
LEV
OO
To LR
To CH
10
-30
-20
-5
0
5
-10
OO
ST2
LEV
SIP SAFE
ST1 input routing switch
ST1 (& ST3) can be routed directly to the main L-R mix bus (switch up) or to
the corresponding stereo channel section where the signals will sum with the
ST2 (& ST3) inputs from the jack sockets.
ST Channel SiP Safe switch
The Solo in Place Safe switch isolates the stereo channel from the muting
function of the Solo in Place system. Designed so that if effects are returned
to one or both stereo channels, they can be safe from muting by the SiP sys-
tem thereby allowing any soloed channels to be heard with effects intact.
ST2 Level
The input level control varies the level of the signal from off (fully attenuated)
to +10dB of gain at the maximum position.
ST1 IN
R
L
ST2
L/M
R
IN
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GS-R24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GS-R24 in the language / languages: English as an attachment in your email.

The manual is 8,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info