541368
14
Zoom out
Zoom in
Previous page
1/44
Next page
Allen & Heath 14 GS_R24 User Guide
MONO INPUT CHANNEL
Auxiliary sends 1 & 2
Each of these controls sends a signal to an Aux bus. The signal is sourced pre-
fade which means that the level is independent of, and unaffected by the fader.
Auxes 1 & 2 are primarily used for foldback monitoring purposes, as the fader
does not affect the level.
These sends are affected by the Mute switch by default, so muting the channel
will also mute the Aux sends but they can be selected to be independent of
the mute status.
The control varies the signal level to the bus from off (fully attenuated) to
+6dB, with unity gain at the arrow.
There are master level controls for all of the Auxiliary outputs situated in the
master section of the mixer.
Auxes 5 & 6
The source for Aux sends 5 & 6 is post-fader by default. They are also muted
by the Mute switch. Auxes 5 & 6 are primarily used for effects sends. How-
ever, an internal jumper option can be altered to select them to be sourced
pre-fader, for example if more monitor sends are required.
Auxes 3 & 4
The source for Aux sends 3 & 4 is normally post-fader but can be selected
pre-fader by pressing the Pre switch.
PAN
The pan control adjusts how the signal from the mono input channel is shared
between the left and right buses and between odd and even group buses.
Bus Routing Switches
The L-R switch connects the post-fade signal to the main L-R mix bus
via the pan control. For minimum noise from the mix bus summing
amplifier, leave the switches in their up positions if the channel signal is
not required on the bus.
The M switch routes the post-fade signal to a mono mix bus which is
independent of the pan control.
The 1-2 and 3-4 switches are for routing the post-pan signal to pairs of
audio sub-groups which have independent insert points, master faders,
outputs and sub routing to the main mix buses if required.
1
+6
AUX
2
+6
AUX
3
+6
AUX
4
+6
AUX
5
+6
AUX
6
+6
AUX
Pre
LR
PAN
DAW
A
B
C
D
L-R
1-2
3-4
BUS
M
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GS-R24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GS-R24 in the language / languages: English as an attachment in your email.

The manual is 8,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info