541356

Allen-Heath GL 4000 Manual

21
Zoom out
Zoom in
Previous page
1/54
Next page
20
GROUP
MATRIX MASTER - Controls the output of the matrix mix. Adjust LEV
to trim the output level to match the connected equipment. ON switches
the output on or off, ideal for checking the effect of individual or combinations
of speakers in a multispeaker system. AFL lets you monitor the signal
post level trim, post insert, but pre ON switch.
OUTPUT REVERSE - This underpanel mode switch reverses the matrix
output jack with the related aux output XLR and switches the aux insert out
of the aux signal path and into the matrix path. This gives the matrix a
balanced XLR for driving the long cable runs to the amplifier racks, and
an insert for plugging in processing devices such as graphic EQ and delay
units. You could also use this to provide aux outputs on jack, often more
convenient when connecting to some of the lower cost effects devices.
Note that only the connectors are reversed. The matrix and aux control
sections are not affected.
TRIM ON - With this underpanel mode switch in the normal up position
the group output is fed post fader to the output XLR. Press the switch to
insert a level trim control in the group output signal path. This does not
affect the level of the subgrouping to LR and M. You can also select
whether the group output is sourced pre or post the group fader. This
facility is most useful when using the group outputs for recording. The
recording can be adjusted independent of the subgrouping and faders.
METER - 12 segment, 3 colour peak reading
meter. Each meter can be switched to monitor
either the main fader signal (normally group) or
the small fader signal (normally aux). The
switch does not affect the optional VU meterpod
which always follows the main fader signals.
AUX MASTER - Provides fader control of the
aux send output. Includes a pre fader aux
meter to display signal activity and warn of
potential mix overload. AFL monitors the post
insert, post fader signal. You can listen to the
effect of graphic EQ typically inserted in a stage
monitor signal path. The MUTE switch is part
of the console mute grouping and automation
system and includes preview and safe.
GROUP REVERSE - Press this underpanel
mode switch to reverse the aux and group
control sections. This configures the group for
stage monitor operation giving you auxes on
the main faders. The groups are still available
on the small faders. The aux and group output
connectors are not affected.
TALKBACK TO AUX - This switch enables
talkback to the related aux mix. When selected,
pressing the large TALK switch routes talkback
to the aux. When not selected, pressing TALK
does not affect the aux.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Allen-Heath GL 4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Allen-Heath GL 4000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info