Manual Al-ko Easy Crush MH 2800 (page 19 of 188) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

601591

Zoom out

Zoom in

1/188

Maintenance and care

440565_b 19

1. Switch off the shredder and disconnect from

the mains connection.

2. Unscrew locking screw (9/1) and remove up-

per shredder part (9/2).

3. Remove the counter blade with guide plate

(10/1) by loosening the three M8 nuts (10/4).

4. Loosen and remove countersunk head

screws M8x10 (10/2).

5. Remove and turn blade (10/3). Replace the

blades if both sides are dull.

6. Secure blade (10/3) using the countersunk

head screws M8x10 (10/2) and turn or replace

the second blade.

7. Next, attach the counter blade with guide

plate (10/1) again and tighten the M8 nuts

(10/4).

8. Finally, attach and screw the upper shredder

part tight.

Care

Remove dirt and material residues after every

use.

Do not clean the machine with running water

or high-pressure.

Do not use any cleaning agents or solvents.

Use a soft brush or cloth for cleaning.

STORAGE

Clean the shredder after its use. Store it in a dry,

lockable place out of the reach of children.

Perform the following tasks when storing during

the winder period:

1. Switch off the machine and disconnect from

the mains connection.

2. Wait for the cutting disk to stop moving.

3. Unscrew locking screw (9/1) and remove up-

per shredder part (9/2).

4. Remove coarse and wet materials to be

shredded from the inside of the shredder.

5. Spay oily care spray ( e.g. AL-KO Multispray

art no. 112890) onto the shredder blade

(10/3).

6. Empty the grass catcher.

7. Finally, attach and screw the upper shredder

part (9/2) tight again.

8. Store the shredder vertically.

WORKING BEHAVIOUR AND WORKING

TECHNIQUE

The shredder is only partly suitable for shred-

ding soft, very juicy waste (e.g. pome fruits,

wet plant waste). These materials should be

directly composted, as they quickly compact

themselves.

The shredder is best suitable for shredding

long-stem, hard or already dried stems of

flowers, shrubs, bushes and pruning.

Shred branches shortly after cutting to

achieve optimum results.

Soft materials to be shredded should always

be processed alternating with branches to

prevent clogging of the cutting disk.

Principally, only feed materials to be shred-

ded after the machine was switched on.

Feed materials to be shredded are pulled

in. Forcefully push against thicker branches,

otherwise the motor will be overloaded.

Only feed as much materials to be shredded

to ensure that hopper and upper shredder

part do not clog.

Empty the grass catcher on a regular base,

as overfilling can cause materials backing up

in the cutting unit.

Refer to "Transporting the shredder" for mo-

ving the shredder to a new location.

WARNING!

Risk of injury due to ejected parts!

Ejected plant parts can cause severe in-

juries!

Always wear personal protective equip-

ment when working with the shredder.

DANGER!

Risk of injury and damage to the ma-

chine if used other than according to the

designated use!

Ejected parts can cause most severe in-

juries!

Do not feed stones, soil, glass, textiles,

plastic or metal parts into the machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Easy Crush MH 2800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Al-ko Easy Crush MH 2800 Manual

Product: