601591
20
Zoom out
Zoom in
Previous page
1/188
Next page
en
Working behaviour and working technique
20 Easy Crush MH 2800
DANGER!
Danger of fatal injury due to inadvertent
movement!
Inadvertent movements can lead to ex-
tremely serious injuries!
Do not reach into the hopper or ejector
chute, while the machine is connected to
mains.
CAUTION!
Damage to the machine due to improper
operation!
Incorrect handling can result in machine
damage!
Only feed materials to be shredded af-
ter the machine was switched on. Do not
feed materials to be shredded after the
machine was switched off.
WARNING!
Risk of injury due to revolving tools!
Revolving tools can cause severe hand
and finger injuries!
When working on the cutting tool, discon-
nect the machine from the mains con-
nection, wait for the tool to stop moving,
and wear protective gloves.
WARNING!
Risk of injury due to long materials to be
shredded!
Longer materials to be shredded can
strike out and cause injuries!
Maintain sufficient safety distance.
WARNING!
Risk of injury due to negligence!
Loss of balance due to negligence can
cause most severe injuries!
Never feed the shredder from an eleva-
ted position.
DISPOSAL
Do not dispose of worn-out machines
or spent batteries (including recharge-
able batteries) in domestic waste!
The packaging, machine and accessories
are made from recyclable materials and
must be disposed of accordingly.
TROUBLESHOOTING
Malfunction Possible cause Solution
Grass catcher missing or not lo-
cked.
Push grass catcher in completely
and lock it.
Mains socket (house installation)
defective.
Use different mains socket.
Motor does not start.
Extension cable defective. Check cable and replace it as nee-
ded.
Grass catcher overflowing (mate-
rial backing up in the cutting unit).
Empty grass catcher and remove
materials to be shredded from the
cutting unit as needed, see "Re-
leasing a cutting disk blockage".
Machine does not pull in
materials to be shredded.
Shredder blade clogged with wet
materials to be shredded.
Remove clogging by feeding
branch material.
Materials to be shredded
are not properly cut.
Blades dull or damaged. Turn or replace blades, see "Re-
placing/turning the shredder bla-
des".
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Easy Crush MH 2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Easy Crush MH 2800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info