601591
18
Zoom out
Zoom in
Previous page
1/188
Next page
en
Operation
18 Easy Crush MH 2800
CAUTION!
Damage to the machine due to improper
operation!
Incorrect handling can result in machine
damage!
Only feed materials to be shredded af-
ter the machine was switched on. Do not
feed materials to be shredded after the
machine was switched off.
Emptying the grass catcher
1. Switch the shredder off.
2. Pull the lock (7/1) down and the grass catcher
(7/2) out of the base.
3. Place the empty grass catcher (8/2) onto the
guide rail (8/1) and push it completely into the
base.
4. Push lock (8/3) up until it engages.
Releasing a cutting disk blockage
1. Switch the shredder off.
2. Disconnect the machine from the mains con-
nection.
3. Unscrew locking screw (9/1) and remove up-
per shredder part (9/2).
4. Remove blocking materials to be shredded.
5. Check cutting disk and shredder blade (10/3)
for damage.
6. Next, attach upper shredder part (9/2) and
tighten locking screw (9/1) again.
7. Reconnect the machine to the mains connec-
tion.
8. Next, switch the shredder on again.
CAUTION!
Danger of crushing when opening and
closing the upper shredder part!
Hand and finger injuries may occur!
Watch out for hands and fingers when
opening and closing the upper shredder
part.
Transporting the shredder
Transport the shredder with closed and locked up-
per shredder part only.
1. Switch the motor off and wait for the cutting
disk to stop moving.
2. Next, disconnect the machine from the mains
connection.
3. Secure shredder using the handle (1/1) and
tilt the machine slightly.
4. Pull the machine behind you when moving to
the next location. Pay attention to the ground
to prevent the machine from tipping over du-
ring the transport.
MAINTENANCE AND CARE
The shredder complies with all relevant safety
standards. Repairs are only allowed to be perfor-
med by qualified specialists, and with the exclu-
sive use of genuine spare parts.
After each use, check the shredder for wear
and renew any damaged components.
Keep venting slots (1/5) free from residues or
accumulations.
Do not get the machine wet or expose it to
moisture.
Only use spare parts specified by the manu-
facturer.
DANGER!
Fatal electric shock hazard!
Touching live parts represents an imme-
diate danger of fatal injury from electric
shock!
Wear protective gloves and disconnect
the machine from the mains before all
maintenance and care jobs.
WARNING!
Risk of injury due to revolving tools!
Revolving tools can cause severe hand
and finger injuries!
When working on the cutting tool, discon-
nect the machine from the mains con-
nection, wait for the tool to stop moving,
and wear protective gloves.
Shredder blade
To obtain an optimum shredding result and
prevent damage to the machine, the blades must
be replaced at regular intervals.
Always replace the blades in pairs.
Always securely tighten the screws.
Do not work with dull blades.
Replacing/turning the shredder blades
Replacement blades for Easy Crush MH 2800 art.
no. 113079
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko Easy Crush MH 2800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko Easy Crush MH 2800 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info