603978
23
Zoom out
Zoom in
Previous page
1/264
Next page
Translation of the original operating instructions
24
Trimming around tree trunks
1. Guide the device slowly and carefully around tree
trunks, ensuring that the cutting string does not touch
the tree bark.
2. Mow from left to right around tree trunks.
3. Cut grass and weeds with the tip of the string and
keep the string head tilted slightly forwards.
Trimming along stone walls, foundations and tree
leads to increased string wear.
Mowing
1. Tilt the string head to the right at an angle of 30 degrees.
2. Move the handgrip to the desired position.
Caution!
Remove foreign objects from the working area.
Risk of injury / damage to property from ejected foreign
objects.
Mowing with the cutting blade
When mowing with the cutting blade, the cutting blade
should be guided in a curving horizontal motion from one
side to the other.
Caution!
Before using the cutting blade, observe the following ad-
ditional instructions:
Use the shoulder strap.
Check the safety hood and cutting blade for correct
installation.
Wear protective clothing and eye protection.
Do not use weed cutter blades for cutting brush-
wood and young trees!
Caution!
Only use original cutting knives and accessories!
Non-original parts can cause injuries and device mal-
functions!
Avoiding recoil
Caution!
Danger of recoil / risk of injury!
Donotusethecuttingbladeinthevicinityofxed
obstacles –
Never use blunt cutters and avoid uncontrolled contact
with foreign bodies. Otherwise there will be an increased
risk of the equipment kickback, which could throw the
machine around. As a result the operator could be make
involuntary movements, which could lead to serious
injuries.
Jamming
Dense vegetation, young trees or brushwood can jam the
cutting blade and stop it turning.
Avoid jamming by noting the direction in which the veg-
etation leans and then cutting from the opposite side.
If the cutting blade becomes entangled during cutting:
Switch off the engine immediately.
Hold up the device so that the cutting blade does
not jump or break.
Push the caught material away
Maintenance and care
Clean the device after every use with a brush and a dry
cloth. Do not use cleaning agents or water.
Air lter
Caution!
Neveroperatethedevicewithoutanairlter.Cleanthe
airlterregularly.Exchangethelterifdamaged.
1. Remove the star screw, take off the cover and take
outtheairlter.
2. Cleantheairlterwithsoapandwater.Donotuse
petrol!
3. Allowtheairltertodry.
4. Installtheairlterinreversesequence.
Fuel lter
Caution!
Neveroperatethedevicewithoutafuellter.Severeen-
gine damage may result.
5. Completely remove the fuel cap.
6. Empty the remaining fuel into a suitable container.
7. Pullthelteroutofthetankwithawirehook.
8. Removethelterwithatwistingmotion.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BC 225 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BC 225 L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info