603978

Al-ko BC 225 L Manual

24
Zoom out
Zoom in
Previous page
1/264
Next page
25
GB
469545_a
9. Exchangethelter.
Carburettor adjustment
The carburettor is optimally adjusted at the factory.Spark
plug (BC 225 L, Fig. 7) (BC 225 B, Fig. 4)
Spark plug gap = 0.635 mm [0.025”].
10. Tighten the spark plug with a torque of 12-15 Nm.
11. Push the spark plug connector onto the spark plug.
Sharpening the string cutter blade
1. Remove the cutting blade from the guard.
2. Clamp the cutting blade in a vice and sharpen it with
aatle.
File in one direction only.
Storage
Empty the fuel tank before long periods of storage
(over the winter)
Only empty the fuel tank outdoors
Allow the engine to cool down before storage
1. Empty the fuel tank.
2. Start the engine and let it idle until it stops.
3. Let the engine cool down.
4. Loosen the spark plug with a spark plug socket.
5. Pour a teaspoon of 2-stroke oil into the combustion
chamber. Pull the starter cord slowly several times to
distribute the oil in the interior of the engine.
6. Insert the spark plug again.
7. Thoroughly clean and service the device.
8. Store the device in a cool dry place.
Caution!
Donotstorethemachineinthevicinityofnakedames
orheatsources–Riskofreand/orexplosion!
Caution! Fire hazard!
Do not store fuelled machine in buildings where the
petrolfumesmightcomeintocontactwithnakedames
or sparks!
Keep the area around the engine, exhaust, battery case
and fuel tank clear of grass cuttings, petrol and oil.
Recommissioning
1. Remove the spark plug.
2. Quickly pull the starter cord to remove leftover oil from
the combustion chamber.
3. Clean the spark plug, check the electrode distance.
4. Re-install the spark plug, replace if necessary.
5. Prepare the device for operation.
6. Fill the tank with the correct fuel/oil mixture (25:1).
Troubleshooting
Problem Correction
Engine does not
start
Incorrect starting procedure,
observe the operating instruc-
tions.
Clean the spark plug and the
airandfuellters.
Engine starts
but does not
continue to run
Set the lever to RUN.
Clean / adjust or replace the
spark plug.
Cleanorexchangethelter.
Engine starts
but does not
run with full
performance
Set the lever to RUN.
Cleanorexchangethelter.
Motor runs
spasmodically
Clean / adjust or replace the
spark plug.
Excessive
smoke
Use the correct fuel mixture
(ratio 25:1).
Faults that cannot be corrected with the help of this table
mustberectiedinanauthorized,specialistworkshop.
Disposal
Machines that are no longer
required must not be disposed of
with household waste!
Packaging, machine and accessories are manufactured
using recyclable materials and must be disposed of
accordingly.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko BC 225 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko BC 225 L in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info