594609
21
Zoom out
Zoom in
Previous page
1/278
Next page
Working information
469494_b 21
WORKING INFORMATION
ADVICE
Observe the local regulations on opera-
ting lawn mowers.
Remove all foreign objects from the lawn prior
to mowing
Keep others away from dangerous areas.
Use the mower only if visibility is good
Guide the machine at walking pace.
Mow only with a sharp cutting blade
Do not mow over obstacles (e.g. branches,
roots of trees).
Mow only across slopes. Do not use the mo-
wer up or down slopes and not on slopes with
more than a slant of 20 degrees.
Added care must be taken on slopes when
changing direction
Tips for mowing
Start mowing as close to the socket as pos-
sible.
Always keep the extension cable on the pre-
viously mowed lawn area.
Constant cutting height 3-5 cm, do not cut
more than half the height of the lawn.
Do not overload the lawn mower! If the motor
speed is greatly reduced due to long, heavy
grass, raise the cutting height and mow se-
veral times.
Mow in the morning or late afternoon to pro-
tect the freshly cut lawn from drying out.
Mow the lawn twice per week during the
strong growing phases. Mow less during pe-
riods of less rain.
Mulching with the mulching kit (option)
With mulching, the cuttings are not collected and
remain on the grass. The mulch protects the
ground from drying out and provides it with nutri-
ents. The best results are achieved by regular cut-
ting of approx. 2 cm. Only young grass with soft
blades will decompose quickly.
Height of grass before mulching: maximum 8
cm
Height of grass after mulching: minimum 4 cm
ADVICE
Adapt your walking speed to the mul-
ching and do not go too quickly.
Utilising the mulch kit
CAUTION!
Risk of injury due to rotating parts!
Remove or replace the mulch kit only
while the motor is switched off and the
cutting blade has stopped.
1. Remove the grass catcher (3)
2. Lift up the baffle plate and insert the mulch kit
into the discharge chute. (4a)
Mulch kit must audibly engage.
ADVICE
If the mulch kit does not engage, the
mulch kit and cutting blade can be dama-
ged.
Removing the mulch kit
1. Lift the baffle plate. (4b-1)
2. Release the locking on the mulch kit. (4b-2)
3. Pull out the mulch kit.
Wheel drive (option)
Adjusting the Bowden cable
If the wheel drive can no longer be switched on or
off while the motor is running, the corresponding
Bowden cable must be readjusted.
CAUTION!
Risk of injury!
Only adjust the Bowden cable when the
motor is switched off.
1. Turn the adjustment part on the Bowden cable
in the direction of the arrow.
2. To check the adjustment, start the motor and
switch on the wheel drive.
3. If the wheel drive still does not function, bring
the lawn mower to a service centre or an aut-
horized specialist firm.
Oiling the drive pinion
Oil the drive pinion on the drive shaft from
time to time with spray oil.
ADVICE
The transmission of the wheel drive is
maintenance-free.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko 4705 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko 4705 E in the language / languages: All languages as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info