594609
20
Zoom out
Zoom in
Previous page
1/278
Next page
en
Operation
20 469494_b
For a short lawn, slide the lever in the di-
rection of the front wheel.
For a longer lawn, slide the lever in the
direction of the rear wheel.
2. Allow the lever to engage.
Single wheel quick adjustment
ADVICE
Always adjust both axles to the same
cutting height.
1. To unlock, press the lever to the side and
hold. (1b, 1c)
For a short lawn, slide the lever in the di-
rection of the front wheel.
For a longer lawn, slide the lever in the
direction of the rear wheel.
2. Allow the lever to engage.
Single wheel adjustment
1. Loosen the wheel bolt. (1d)
2. Insert the wheel bolt in the hole for the desired
cutting height.
3. Tighten the wheel bolt.
4. Make sure all wheels at the same hole posi-
tion.
Working height adjustment (option)
Button adjustment
1. Hold both buttons on the upper handle bar
pressed and adjust to the desired position. (5)
2. Release the buttons so that the upper handle
bar engages.
Clamp adjustment
1. Hold the upper handle bar firmly and release
both clamps. (5)
2. Move the upper handle bar to the desired po-
sition and close the clamps.
Attaching the grass catcher
CAUTION!
Risk of injury!
Remove or replace the grass catcher
only while the motor is switched off and
the cutting blade has stopped.
1. Lift up the baffle plate and hang the grass cat-
cher into the holders.
Fill level indicator (option)
The level indicator is pressed upwards by the air
stream during mowing( 2a). If the grass catcher is
full, the level indicator lies flat on the box (2b). The
grass catcher needs to be emptied.
Emptying the grass catcher
1. Lift the baffle plate. (3)
2. Unhook the grass catcher and remove it to the
rear.
3. Entity the grass catcher.
4. Lift up the baffle plate and hang the grass cat-
cher back into the holders.
Establishing the mains connection
1. Insert the mains plug of the unit connecting
line into the switch/plug combination. (6)
2. Secure the unit connecting cables with the ca-
ble tension relief. (7)
ADVICE
The loop of the mains cable must be long
enough so that the cable tension relief
can glide from one side to the other.
Starting the motor
Start the lawn mower only on level ground and
not in high grass. The ground must be free from
foreign objects, such as stones. Do not lift or tilt
the lawn mower to start it.
1. Keep the start switch of the switch/plug com-
bination pressed. (8, 8a, 8b, 8c)
2. Pull the safety bar towards the handle bar and
hold it there. (8, 8a, 8b, 8c)
3. Release the start button.
Switching off the engine
1. Release the safety bar / handle.
2. Wait until the cutting blade stops.
Wheel drive (option)
CAUTION!
Engage the transmission only when the
motor is running.
Switching on the wheel drive
1. Press and hold the transmission control lever
against the upper handle bar - the transmis-
sion control lever does not engage. (9)
Wheel drive is switched on.
Switching off the wheel drive
1. Release the transmission control lever. (9)
Wheel drive is switched on.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko 4705 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko 4705 E in the language / languages: All languages as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info