594609
22
Zoom out
Zoom in
Previous page
1/278
Next page
en
Storage
22 469494_b
STORAGE
Always store the unit with the mains plug pul-
led.
Fold the upper handle bar to save space du-
ring storage.
Store the mower in a dry place and inacces-
sible to children and unauthorized persons.
REPAIRS
Repairs may only be carried out at AL-KO
service centres or authorized specialist firms.
To avoid an imbalance, the cutting units and
the fastening bolts must only be replaced as
a set.
MAINTENANCE AND CARE
CAUTION!
Risk of injury!
Always pull the mains plug before
carrying out maintenance and care!
Always wear work gloves when car-
rying out maintenance and care on
the cutting tools!
Non-balanced cutting blades cause
serious vibrations and damage the
mower.
Regularly check the grass catcher system for
correct function and wear.
After mowing, thoroughly clean the mower
with a hand broom or a cloth. Dirt and cuttings
left on the underside of the mower can impair
its proper function.
Do not hose down the unit with water! Water
can damage the switch/plug combination and
the electric motor.
Regularly check the cutter blade for damage.
Have the blunt or damaged cutter blades
sharpened or replaced only at an AL-KO ser-
vice centre or authorized specialist firm. Re-
sharpened cutter blades must be balanced.
Tightening torque of the blade screw 15 Nm
+5
Ensure that all nuts, bolts and screws are
firmly tightened and that the mower is in a
safe condition for operation.
Observe that on devices with multiple cutting
blades, the movement of one cutting blade
can lead to the rotation of the remaining bla-
des.
Observe when adjusting the machine that no
body parts can be jammed between the cut-
ting blades and fixed parts of the unit.
Allow the motor to cool before turning off the
unit.
Observe that the cutting blade can still be mo-
ved even when the voltage supply is switched
off.
Only use original replacement parts and ac-
cessories.
CAUTION!
Cutting blade and motor shaft may not
be aligned if damaged!
CAUTION!
Risk of injury!
After the blade screw has been loosened
five times, it must be replaced with an ori-
ginal blade screw!
ADVICE
After maintenance work on isolation
parts (e.g. exchange of the cutting bla-
des), and isolation protection test must
be performed according to guideline
VDE 701.
Professional inspection is necessary:
After running onto an obstacle
At immediate standstill of the motor
When the cutting blade is bent
When the motor shaft is bent
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Al-ko 4705 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Al-ko 4705 E in the language / languages: All languages as an attachment in your email.

The manual is 6,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info