630535
33
Zoom out
Zoom in
Previous page
1/49
Next page
33
In an External MIDI Sound Module or Software
You can use the EWI5000 to send a MIDI Program Change message to a connected external
MIDI sound module or to software on a connected computer. To do this, follow the same
steps as described above. When you select a new Program on the EWI5000, it sends a MIDI
Program Change message of the same number to your external sound module.
In order to do this properly, configure the settings described below.
1. Press and hold the Setup Button to enter Setup Mode.
2. Press the Hold Button or Interval Button to scroll through the options until PC
(Program Change) appears in the display.
3. Release the Setup Button. The display will show the current mode. Use the Hold Button
or Interval Button to select any of the following options:
dP (Direct Program): When this is on, you can touch the Program Button and then
touch a note key assigned to a Program to send the Program Change message. (To
assign Programs to the note keys, please see Using the Note Keys.) Press the
Trans Button to turn it on or off. When it is on, a dot will appear in the display.
Ot (Out): When this is on, the EWI5000 can send Program Change messages from
its USB Port and MIDI Out. When this is off, the EWI5000 will not send any Program
Change messages externally. Press the Trans Button to turn it on or off. When it is
on, a dot will appear in the display.
4. Press the Setup Button to return to Performance Mode.
Saving Programs
To save a Program:
1. Make sure the current Program has all of the settings you want to save.
2. Press the Save Button. The "destination" User Program number will then blink in the
display.
3. Use the Hold Button and Interval Button to select the User Program number you want
to save to.
4. Press the Save Button again to save the Program, or press any other button to cancel
the operation.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info