630535

Akai EWI 5000 Manual

35
Zoom out
Zoom in
Previous page
1/49
Next page
35
Chorus
The Chorus effect modulates the pitch and a delay of the input signal, which are then added to
the dry signal. In small amounts, this creates the illusion of multiple voices playing at once.
To edit the Chorus effect:
1. Press and hold the FX Button, and then use the Hold Button and Interval Button to
select ch (Chorus).
2. Release the FX Button. The effect level will appear in the display.
3. To set the effect level, use the Hold Button and Interval Button (00–99).
Tip: You can also set the effect level by using EWI5000's Chorus Parameter Knob.
To select another parameter to edit, or press and hold the Trans Button or Level Button,
use the Hold Button and Interval Button to select the parameter, and then release the
Trans Button or Level Button:
• rt (Rate): This determines the rate of the chorus effect. 00 corresponds to a rate of
1.0 Hz, while 99 corresponds to a rate of 3.0 Hz.
• dP (Depth): This determines the depth or intensity of the chorus effect. 00 is a
subtle depth, while 99 produces a very obviously modulated sound.
Tip: To produce more pronounced "shimmering" and "watery" sounds, set the
Depth to higher values.
4. Press the FX Button once to exit the FX Menu.
Delay
The Delay effect produces an echo of the original signal for a specified period of time.
To edit the Delay effect:
1. Press and hold the FX Button, and then use the Hold Button and Interval Button to
select dL (Delay).
2. Release the FX Button. The effect level will appear in the display.
3. To set the effect level, use the Hold Button and Interval Button (00–99).
Tip: You can also set the effect level by pressing and holding EWI5000's Trans Button
while turning the Bite Parameter Knob.
To select another parameter to edit, or press and hold the Trans Button or Level Button,
use the Hold Button and Interval Button to select the parameter, and then release the
Trans Button or Level Button:
• dt (Time): This determines the rate of the delay effect. 00 corresponds to a rate of
0.1 ms, while 99 corresponds to a rate of 742.9 ms. Each increment is
approximately 7.5 ms.
• Fb (Feedback): This determines how much of the effect's signal is routed back into
the effect again. No signal is fed back into the effect at 00, while 99 produces a lot
of feedback. Be careful if you set this to high values!
4. Press the FX Button once to exit the FX Menu.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info