630535

Akai EWI 5000 Manual

32
Zoom out
Zoom in
Previous page
1/49
Next page
32
Using the Hold Button and/or Interval Button
Note: You can use just the Hold Button, just the Interval Button, or both buttons to select
Programs. In other words, these two buttons' functions can be independent of each other.
1. Make sure you are in the desired bank (Preset or User). If not, press the Bank Button to
select it.
2. Make sure you have set the Hold Button to UP (described in Assigning Controls > Hold
Button) and/or the Interval Button to dn (described in Assigning Controls > Interval
Button).
3. Press the Hold Button to move to the next-highest Program, and/or press the Interval
Button to move the next-lowest Program. You can also press and hold it to move quickly
through the available Programs.
Using the Note Keys
You can assign Program numbers to specific note keys, allowing you to select Programs more
quickly than scrolling through them with the Hold Button or Interval Button. You must assign
a Program to a note key first, though.
To assign a Program to a note key:
1. Make sure your PC (Program Change) setting has dP (Direct Program) enabled. See In
an External MIDI Sound Module or Software to learn how to do this.
2. Select the Program number you want to assign (using any of the methods described in
this chapter, Selecting Programs).
3. Touch the Program Button, and press the Setup Button. The Program number will flash
in the display.
4. Touch the desired note key and blow into the mouthpiece. The Program is now assigned
to the note key you were touching. (If you touch more than one note key during this step,
the Program will be assigned to the top-most note key you are touching.)
Note: While touching the Program Button, no sound will play if you blow into the mouthpiece.
To select a Program using the note keys:
1. Make sure your PC (Program Change) setting has dP (Direct Program) enabled. See In
an External MIDI Sound Module or Software to learn how to do this.
2. Make sure you are in the desired bank (Preset or User). If not, press the Bank Button to
select it.
3. Without touching any note keys, touch the Program Button (the screw just above the
Pitch-Bend Up Plate). The current Program will appear in the display.
4. While still touching the Program Button, touch the note key assigned to the desired
Program. (If you touch more than one note key during this step, the Program that is
selected will be the one assigned to the top-most note key you are touching.)
5. After the assigned Program number appears in the display, blow into the mouthpiece.
The Program is now selected.
6. Release the Program Button.
Note: While touching the Program Button, no sound will play if you blow into the mouthpiece.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Akai EWI 5000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Akai EWI 5000 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info