29025
17
Zoom out
Zoom in
Previous page
1/23
Next page
Page 17
VG6000
DELTA WING ( DELTA )
The Delta feature is used when your aircraft is a flying wing.
You will use two servos on two seprate channels to mix both
ailerons and elevator together using only the left and right wing
controls. You will use channel 1 for the left wing and channel 2
for the right wing. Mount the servos as shown in the drawing
below. After you have installed the servos check to make sure
that the ailerons work in the proper direction and check that when
you move the elevator, both ailerons move up and down in the
proper direction. If eighter channel is not working in the corect
direction simply change the direction of the servo using the REV
for that channel.
To use DELTA, move the cursor to the DELTA using the FUNCTION keys. Next use the INC+ or DEC- keys to select YES
or NO. Selecting YES will activate DELTA on.
FLAPERONS ( FLPRN )
Flaperons are used when you want to have both your ailerons work as
flaps as well. For this to work you will need to setup two aileron servos
on two sperate channels on a conventional aircraft. You will be using
Channel 2 for the left aileron and channel 6 for the right aileron.
Before installing the linkage to the servos make sure that your flap
switch CH 6, is in the proper “N” position. This will make sure that when
you turn on or activate the flaperons, your servos will not change there
centering. Remember! if you activate or turn on Flaperons, both servos
should not move. If they do, you do not have the flap switch in the proper
position. Next make sure both ailerons are working in the proper direction. If not use the REV to correct.
After your ailerons are working properly, move the flap switch “CH 6” to the middle or position 1. Both ailerons should
move down to there 50% flaps down position. Next move the flap switch to position 2. This will move both ailerons
down to there 100% down position. Remember both flap positions are adjustable.
To use FLPRN, move the cursor to the FLPRN using the FUNCTION keys. Next use the INC+ or DEC- keys to change to
turn flaperons on of off. See next page for servo setup.
Other features that work together with flaperons: (DIFF), (FL-EL), (EL-FL), (Flaps ch 6)
Lt Wing Channel 1 Rt Wing Channel 2
Delta Wing Setup
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics VG6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics VG6000 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info