29025
19
Zoom out
Zoom in
Previous page
1/23
Next page
Page 19
VG6000
FLAP TO ELEVATOR MIXING ( FL-EL )
When you lower your flaps on just about any aircraft, it will tend to
raise the nose or start to climb. By using the Flap to Elevator mix,
you can change the way the aircraft reacts when the flaps are
lowered by adding a small amount of down elevator. Flaps are
mainly used to create more lift so the aircraft can land at a slower speed.
To use FL-EL, move the cursor to the FL-EL using the FUNCTION keys. Next use the INC+ or DEC- keys to change the
percentage of up or down elevator as needed. To see the amount of elevator movement you must move the flap
switch to position 1 or 2. When the flap switch is in the “N” normal position, you will not see any flap to elevator
mixing. Default is set at 0. Range is from -100 to 100% and 0 is no elevator mix at all.
AILERON TO RUDDER MIXING ( AL-RU )
On some high wing aircraft that have a lot of side area on the
fuselage will find that aileron to rudder mixing will greatly help
when making a turn. The way this mix works is as you move the
aileron stick left or right, the rudder will move as well giving you
a little more control on your turns. Always have the rudder move
in the same direction as the aileron. You may want to start with
a small amount of mix to start with and adjust as needed after a flight.
Remember: when setting a aileron to rudder mix, it will be active at all
times You do not have a switch to turn it off.
To use AL-RU mixing, move the cursor to the AL-RU using the FUNCTION keys. Next use the INC+ or DEC- keys to
change percentage of rudder movement.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics VG6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics VG6000 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info