29025

Airtronics VG6000 Manual

15
Zoom out
Zoom in
Previous page
1/23
Next page
Page 15
VG6000
END POINT ADJUSTMENT ( EPA )
EPA will allow you to increase or decrease the total amount of travel the
servo has. EPA is available on all channels and should only be used to
fine tune maximum servo movement. All of your linkages and control
surfaces should be as close as possible to the model specifications
before decreasing or increasing EPA. A good example for EPA would
be when you want to use 2 aileron servos on 2 different channels and
you want to setup both to have the same amount of throws to each other
up and down. NOTE: You must have the FLAPERON feature activated in
order to use 2 sperate aileron servos.
To use EPA, move the cursor to the EPA using the FUNCTION keys. Next use the CH/TIMER key to change to the
channel you want to set your EPA. Next move the stick in the direction you want to increase or decrease and take
note the arrows on the LCD screen. They will point in the direction you are adjusting. EPA can be set independently
from side to side or up and down. Adjustment is from 0 to 150% in each direction.
SERVO CENTERING ( CENT )
Servo centering to a great feature when it comes to setting up a
new model and or setting your servo arms to right at 90 degrees.
When using servo centering, take note that it will change not only
the center position of the servo but as well change both left and
right end points.
Example, you installed a servo arm on your servo but it will not
lineup perfectly 90% to the servo. You now can adjust the servo
centering so now the arm is at 90% of the servo. Servo centering
can be adjusted from 0 to 100% but is best kept within + or - 10%
any more than that you will need to try another servo arm or adjust
your linkage better.
To use CENT, move the cursor to the CENT using the FUNCTION keys. Next use the CH/TIMER key to change to the
channel you want to set your CENT. Adjust using the INC+ or DEC- keys. Adjustment is from +100 to -100.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics VG6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics VG6000 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info