29025
14
Zoom out
Zoom in
Previous page
1/23
Next page
Page 14
VG6000
DUAL RATE AILERON AND ELEVATOR ( D/R )
This feature allows you to set a minimum and maximum control
rate for ailerons and elevator with the use of a dual rate switch.
Move the cursor to high-lite the EL D/R. By moving the Dual Rate
Elevator switch you can see the 1 and 2 turn off and on in
conjunction with the switch location 1 or 2.
Depending on how you like to use your dual rates will depend on the
switch direction you want the fast rate to be. For example you would
like to take off and fly on a lower rate with the switch in the #1 position
and for landing you want a faster rate on position #2.
First set the elevator dual rate switch to the #1 position. You can see on the screen that the percentage is 100. Use
the DEC- key to lower the number to about 75%. This will give you 25% less movement than the faster rate on position
#2 making position #1 your low rate and #2 your fast rate for landing. Repeat the same for Dual Rate Ailerons by
moving the cursor to the AL D/R.
Use the ( INC+ ) or the ( DEC- ) to raise or lower the percentages from 0 to 150%.
EXPONENTIAL ELEVATOR AND AILERON ( EXP )
Exponential allows you to change the amount of movement the
servo has compared to the stick movement. For example, when
you move the aileron stick left or right the servo will move at
the same rate as the stick when expo is set at 0. When flying
your aircraft with 0 expo, you will have the felling of 1 to 1 or a
linear fell. By increasing the expo to about 40% you will change
the amount of servo movement compared to the amount of stick
movement. When adding expo you will see that the servo will
move slower or less amount in the middle to 40% of your stick
movement. This will soften the fell of your ailerons around the middle area of the stick but will still give you full servo
movement at the end of the stick. Use the FUNCTION keys to move the cursor the EL EXP or AL EXP and press the
INC+ key to add expo.
A good starting point for aileron expo is +25% and use +5% for elevator.
Expo can be set for both switch positions 1 and 2.
NOTE: using Negative expo will make your ailerons and elevator more sensitive in the middle stick area which will
make the aircraft reactions very fast. Adjustment is from +100 to -100.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Airtronics VG6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Airtronics VG6000 in the language / languages: English as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info