648290
18
Zoom out
Zoom in
Previous page
1/76
Next page
18
Installation – for qualied contractors
8.1.2 Bathrooms and shower rooms
The heating mat must not be installed in areas where
sanitary equipment such as baths, showers, freestanding
WCs, etc. are to be installed.
8.1.3 Floor coverings
The heating mat is suitable for use with a range of oor
coverings, e.g. tiles, carpets, PVC or parquet.
!
Material losses
Only use oor coverings which are suitable for un-
deroor heating systems.
Note that different oor coverings have different thermal
conductivity values according to their type and the thick-
ness of the material:
Floor covering Max. thickness Thermal conductivity
Tiles 30 mm
λ = 1.00 W/(m · K)
Carpet 20 mm
λ = 0.09 W/(m · K)
Parquet 16 mm
λ = 0.14 W/(m · K)
PVC 10 mm
λ = 0.23 W/(m · K)
Cork 10 mm
λ = 0.08 W/(m · K)
8.1.4 Covering the oor
Additional oor coverings, e.g. carpets, may lead to higher
temperatures in the oor itself.
» Do not use oor coverings which are more than
10 mm thick.
8.2 Safety clearances
!
Material losses
Cupboards which cover the whole area must not be
placed on heated areas.
» Make sure that you leave a 60 cm wide unheated
edge area along the walls.
» Make sure that you observe a distance of at least
30 mm from all conductive materials.
!
Material losses
The heating conductors on heating mats installed in
parallel must not touch.
» Make sure that you observe a distance of at least
50 mm when installing heating mats in parallel.
8.3 Installation diagram
You must draw up an installation diagram before installing
the heating mat. See chapter "Sample installations" and
"Safety clearances" in this respect.
» Draw the position of the heating mats, the unheated
edge area, the temperature sensor and the cold lead
on the installation diagram.
8.3.1 Sample installations
26_07_29_0108
50 mm
50 mm
8.3.2 Position of the temperature sensor
The temperature sensor must be positioned directly
below the heating mat and approx. 100 mm from the
edge of the heating mat.
The temperature sensor must be positioned halfway
between two heating conductor loops.
The temperature sensor lead must not cross or touch
the heating conductor.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG TBS TB 50 THERMO BODEN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG TBS TB 50 THERMO BODEN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info