648332
23
Zoom out
Zoom in
Previous page
1/76
Next page
23
Installation – for qualied contractors
Removing / replacing the ow limiter
Note
Never remove the ow limiter if you are using a ther-
mostatic valve.
L1’
2
L
L
L
X11
26_02_02_0771
2
1
1 Plastic prole washer
2 Flow limiter
» Remove the ow limiter. Re-insert the plastic prole
washer.
DDLE Basis 18/21/24: Replace the ow limiter
» If 24 kW connected load has been selected, replace
the tted ow limiter (white) with the ow limiter sup-
plied (orange, xed to the cold water pipe).
Making the electrical connection
WARNING Electrocution
Carry out all electrical connection and installation
work in accordance with relevant regulations.
WARNING Electrocution
The connection to the power supply must be in the
form of a permanent connection in conjunction with
the removable cable grommet. Ensure the appliance
can be separated from the power supply by an iso-
lator that disconnects all poles with at least 3 mm
contact separation.
WARNING Electrocution
Ensure that the appliance is earthed.
!
Material losses
Observe the type plate. The specied voltage must
match the mains voltage.
» Connect the power cable to the mains terminal
(see chapter "Installation / Specication / Wiring
diagram").
DDLE Basis 18/21/24: Re-plugging the coding
card
In its delivered condition, the appliance is plugged to
21 kW. When changing to a different connected load,
carry out the following steps:
D0000047341
» Re-plug the coding card according to the actual
connected load (for connected load options and fuse
protection of the appliance, see chapter "Installation /
Specication / Data table").
» Tick the selected connected load on the type plate.
Please use a ballpoint pen to do this.
Fitting the lower section of the back panel
3
L
3’
4
L
2’
1
L
1’
2
L
L
L
NT C
T- sol
l
X11
26_02_02_1348
» Fit the lower section into the back panel. Click the
lower section of the back panel into place.
» Align the mounted appliance by loosening the xing
toggle, aligning the power supply and back panel,
and then re-tightening the xing toggle. If the appli-
ance back panel does not rest against the wall, you
can secure the appliance with two additional screws
(see chapter "Installation / Installation options /
Water installation on nished walls").
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DDLE Basis 13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DDLE Basis 13 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info