648332
22
Zoom out
Zoom in
Previous page
1/76
Next page
22
Installation – for qualied contractors
Fitting the cable grommet
26_02_02_0950
» Fit the cable grommet. For connecting cables
> 6 mm², enlarge the hole in the cable grommet.
Making the water connection
!
Material losses
Carry out all water connection and installation work
in accordance with regulations.
26_02_02_0948
» Seal and insert the twin connectors.
!
Material losses
Never use the shut-off valve in the cold water inlet
to reduce the ow rate.
Preparing the back panel
!
Material losses
If you break out the wrong knock-out by mistake, use
a new back panel.
L
L
L
D0000041893
» Break out the cable grommet knock-out in the
back panel. Deburr the sharp edges with a le if
necessary.
Installing the appliance
L
L
L
3
L3’
4
L2’
1
L1’
2
L
L
L
MV
NT C
T- soll
X1 1
D0000041894
» Push the back panel over the threaded stud and the
cable grommet. Pull the cable grommet by the lock-
ing hooks into the back panel using pliers, until both
locking hooks audibly click into place.
» Remove the transport plugs from the water
connections.
» Push the back panel rmly against the wall. Lock the
xing toggle by turning it 90° clockwise.
D0000041925
» Screw the water connection pipes with at gaskets
onto the twin connectors.
!
Material losses
The strainer must be tted for the appliance to func-
tion.
» When replacing an appliance, check whether
the strainer is installed (see chapter "Installa-
tion / Maintenance").
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AEG DDLE Basis 13 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AEG DDLE Basis 13 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 19,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info