755222
103
Zoom out
Zoom in
Previous page
1/116
Next page
Appendix IV – Wiring Information
97
1.18 Keyswitch
If programmed accordingly, each zone permits
the connection of a key-switch for activating or
deactivating the alarm centre.
You can use key-switches with pulse contact or
permanent contact. For key-switches with
permanent contact, note that the control units are
still active and misinterpretations can occur if a
key-switch is still active but the alarm centre has
already been deactivated via the control unit. We
therefore recommend the use of key-switches
with pulse contact.
When the key-switch is activated, the exit delay
time for the respective area is activated, following
which the alarm centre is activated. In the case of
internal areas, immediate activation is possible.
At reactivation, the alarm centre is deactivated.
Some key-switches have additional LED displays
that can be externally activated. If necessary,
these can be connected to the programmed
transistor or relay outputs.
1.19 Loudspeaker
You can connect a 16-Ohm loudspeaker to the
SPEAKR (+, 0V) clamps.
The loudspeaker output is designed for the
connection of 2 loudspeakers. The alarm sounder
can be integrated direct in the housing of the
alarm centre.
Important: External alarm sounders belong to all
partitions. Make sure that the loudspeaker cables
are separate from the network cables. The
distance from the alarm centre should not exceed
20m.
1.20 Digital communication outputs
The alarm centre has 16 digital communication
outputs that can be connected to a digital modem.
Alternatively, low-current devices such as LEDs
can be connected. The factory setting is that the
outputs switch negatively when activated, i.e.,
from 12V to 0V. At 0V up to 100mA can flow
through the output from an external source.
You can also invert outputs so that they switch
positively on activation, i.e., from 0V to 12V. In
this case, the output supplies a maximum current
of 5mA at 12V for powering external devices.
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 User Manual - English - 16 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info