755222
102
Zoom out
Zoom in
Previous page
1/116
Next page
Appendix IV – Wiring Information
96
1.15 Connecting a signalling device with
its own power supply
The functioning principle of this alarm signalling
combination is based on an uninterruptible power
supply to the bell and a rechargeable battery
integrated in the bell housing.
At a transistor output of the alarm centre, either a
bias for the bell is applied that is removed in the
event of an alarm (or is cut in the event of
tampering), or the alarm centre issues a trigger
signal on alarm via the transistor output that
activates the bell and the strobe.
The alarm duration of the bell is set on the
signalling equipment direct. Here too, the strobe
remains active until it is acknowledged manually.
For correct installation, please read the
installation instructions of the signalling device
with own power supply.
1.16 Integrated modem
The built-in modem of the central unit enables
you to send the most varied system messages to
different telephone numbers via the telephone
network. Furthermore, the system can be
monitored and controlled using a PC on which
the Downloader software is installed, and
information on alarm states can be transmitted to
a command centre. You can connect the system
either with an RJ11 plug or via the telephone
connector clamps to the telephone network.
Connect as shown in this picture:
See also the information on auxiliary alarm
outputs on the next page.
1.17 Auxiliary alarm outputs
You can optionally connect a relay board with 8
relays to the digital outputs of the alarm centre.
Connect the cables to the digital outputs of the
alarm centre as follows. Note that the colour code
of the cable is not always the same as described
below.
Colour Function
Black (1) Ground 0V permanent
Orange (2) Auxiliary output 1
Yellow (3) Auxiliary output 2
Green (4) Auxiliary output 3
Blue (5) Auxiliary output 4
White (6) Auxiliary output 5
Violet (7) Auxiliary output 6
Brown (8) Auxiliary output 7
Grey (9) Auxiliary output 8
Red (10) +12V
External equipment,
e.g. fax
Telephone line
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Terxon LX - AZ4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Terxon LX - AZ4200 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus Terxon LX - AZ4200

Abus Terxon LX - AZ4200 User Manual - English - 16 pages

Abus Terxon LX - AZ4200 Installation Guide - German - 31 pages

Abus Terxon LX - AZ4200 User Manual - German - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info